Naming Preset Stations - Sony RHT-G1550 Operating Instructions Manual

Naming preset stations

You can enter a name for preset stations. These
names (for example, "XYZ") appear in the front
panel display when a station is selected.
Note that no more than one name can be entered
for each preset station.
Note
• You cannot enter a name for preset station of the
Radio Data System (RDS) (page 27).
1
Press INPUT SELECTOR + or –
repeatedly until "FM" or "AM" appears
in the front panel display.
The last received station is tuned in.
2
Press PRESET + or – repeatedly to
select the preset station you want to
create an index name for.
3
Press MENU.
4
Press X/x repeatedly until "Name In?"
appears in the front panel display.
5
Press .
6
Create a name by using
Press X/x to select a character, then press c
to move the cursor to the next position.
Letters, numbers, and other symbols can be
input for a radio station name.
If you enter a wrong character
Press C/c repeatedly until the character to
be changed flashes, then press X/x to select
the desired character.
7
Press .
"Complete!" appears in the front panel
display, and the station name is stored.
8
Press MENU.
26
GB
C c
/X/x/ .
Tip
• You can check the frequency in the front panel display
by pressing DISPLAY repeatedly (page 27).