Table of Contents
Advertisement
In case of problems in the data communication with the HP-01, the
following message will be displayed.
Fig.5-6 Error message
During proper data transfer, a progressive bar is displayed.
Fig.5-7 Progressive bar
At the end, a message informs if the update has been successfully
performed.
Fig.5-8 Flashing terminated
Turn the HP-01 OFF (it could seem to be already OFF but it is not) and turn it
ON again.
The HP-01 is now updated with the new version of the internal firmware.
It is now possible to disconnect the cable connected to the PC, with the HP-
01 meter either switched on or off.
Subsequently, when the meter is switched on again, the new version will be
displayed in the 8053B or HP01-TS application software.
To obtain firmware or FPGA or program updates for HP-01, please
contact your NARDA distributor or download it directly from the
NARDA Web site: www.narda-sts.it
Update Firmware
5-3
Advertisement
Table of Contents
