Table of Contents
Advertisement
5-2
Firmware Update
The User should check that the battery level is at least 3.9 V before
starting the upgrade.
As soon as the connection is established, a message informs to turn the HP-
01 OFF and turn it ON again; press OK to confirm.
The following window will appear:
The firmware components can be updated by this application. The: Firmware
is the main analyzer internal program and it is automatically stored within the
HP01-TS directory during HP01-TS software installation. To start the process
simply select Update Firmware button, and wait (less than one minute) until
the automatic transfer is completed.
Fig.5-3 Switch HP-01 on
Fig.5-4 Update firmware
Fig.5-5 Update firmware button
Advertisement
Table of Contents
