Table of Contents
Advertisement
3.1 Introduction
3.2 Hardware
requirements
1
Document HP01EN-10707-1.05 - © NARDA 2021
3 – HP01-TS installation
HP01-TS is a useful software tool developed for remote PC control, through
fibre optic link, of HP family Magnetometers and field analyzers.
By means of the USB-OC optical to USB converter, HP-01 can be
connected to a PC USB port.
If needed, the selected COM port should be assigned to the application
software (see cap.5 HP01-TS applications).
HP01-TS software requires an analyzer is connected to PC in order to run.
The HP01-TS installation program automatically installs the driver for USB
optical converter.
Minimum requirements:
• Processor: Pentium or equivalent
• 256 MB RAM
• At least 64 MB of free space on hard disk
• 1 free USB port
• Windows Operating system™ XP/Vista/Win7/Win8.1/Win10
The User might have the need of administrator privileges to install the
software in Windows Vista, Windows 7, Windows 8.1 and Windows
10. For further information, please see the next paragraph.
The new releases can be downloaded directly from the narda website.
http://www.narda-sts.it
HP01-TS software
3-1
Advertisement
Table of Contents
