Uconnect 8.4A Owner's Manual Supplement page 223

222 Uconnect® 8.4AN
1. Enter the Latitude by typing in the numbers. Use the
left and right arrows to select specific numbers in the
location shown.
2. Touch the OK soft-key.
3. Enter the Longitude by typing in the numbers. Use the
left and right arrows to select specific numbers in the
location shown.
NOTE: Touch the Format soft-key to change the format
of the Latitude/Longitude entry.
4. Touch OK to confirm the destination.
5. Touch the Yes soft-key to confirm your destination and
begin your route.
NOTE: If you are currently on a route guidance and you
select a Geo Coordinate, the system will ask you to
choose one of the following:
• Cancel previous route
• Add as first destination
• Add as last destination
You can touch the back arrow soft-key to return to the
previous screen or the X soft-key to exit.