Makita HR007G Instruction Manual page 16

NOTE: If you connect a vacuum cleaner to the dust
cup set, remove the dust cap before connecting it.
1
Fig.29
► 1. Dust cap
Uninstallation
Push the chuck cover down all the way and pull a bit off.
1
2
Fig.30
► 1. Bit 2. Chuck cover
Hold the attachment unit of the dust cup set and pull it
apart from the tool.
Fig.31
► 1. Attachment unit
NOTE: If the cap comes off from the dust cup set,
place it back to the original position.
1.
dust cup set.
Fig.32
► 1. Bellows 2. Attachment unit
2.
facing upwards.
Fig.33
► 1. Cap 2. Printed side 3. Grooves 4. Lips of upper
3.
the lips of the upper opening of the attachment unit.
1
Fig.34
16 ENGLISH
Detach the bellows from the attachment unit of the
1
Set the cap back in place with its printed side
4
2
opening 5. Attachment unit
Be sure that the grooves around the cap well fit in
2
5
3
1