Global Setup - IK Multimedia AmpliTube X-DRIVE User Manual

AmpliTube X-DRIVE

Global Setup

The global setup menu features different settings to manage the global behavior of the pedal independent of
which preset is active.
To access the Global Setup menu, hold down the PARAMETER encoder and select GLOBAL SETUP .
NAME MODE
Changes the way preset names are displayed:
• NAME: the display shows only the preset's name.
• PC+NAME: the display shows the program change number followed by its name.
• BNK+NAME: the display shows the currently selected preset bank followed by its name.
EXT. CTRL
Selects which type of external controller pedal is attached to the EXT. CONTROL jack.
• TRS EXP PEDAL: select this if the pedal connected to the EXT. CONTROL jack is a TRS type expression
pedal.
• RTS EXP PEDAL: select this if the pedal connected to the EXT. CONTROL jack is a RTS type expression
pedal.
• N.O. SWITCH: select this if the pedal connected to the EXT. CONTROL jack is a normally open single
footswitch pedal.
• N.C. SWITCH: select this if the pedal connected to the EXT. CONTROL jack is a normally close single
footswitch pedal.
• N.O. DUAL SWITCH: select this if the pedal connected to the EXT. CONTROL jack is a normally open
double footswitch pedal.
• N.C. DUAL SWITCH: select this if the pedal connected to the EXT. CONTROL jack is a normally close
double footswitch pedal.
DUAL SWITCH MODE
Selects the operative mode for the double switch pedal connected to the EXT. CONTROL jack.
• BANK: select this if you want to use the connected double switch pedal to browse among banks.
• PRESET: select this if you want to use the connected double switch pedal to browse among presets.
EXP . CALIBRATION
Starts the calibration process for the connected expression pedal.
Refer to the expression pedal calibration paragraph to learn more about calibrating an expression pedal with
X-GEAR.
44
Global Setup