Register Your Irig Stomp I/O; Installation And Setup; Ios Devices - IK Multimedia iRig Stomp I/O User Manual

English

Register your iRig Stomp I/O

By registering, you can access technical support, activate your warranty and receive free JamPoints™ which will
be added to your account. JamPoints™ allow you to obtain discounts on future IK purchases! Registering also
keeps you informed of all the latest software updates and IK products.
Register at: www.ikmultimedia.com/registration

1 Installation and setup

iRig Stomp I/O can be USB bus powered or powered with the external PSU (included).
iOS: when connected to an iOS Device the external PSU is needed. The external PSU will charge the iOS
Device's battery. The USB port can supply power (to the iRig Stomp I/O) when connected to iOS devices (iOS
device will not be charged).
USB: typically, when connected to an USB host (MAC, Windows), all the needed power is provided by the host. If
the connected host is not capable to provide the required power the PSU may be needed.

1.1 iOS Devices

1. Connect the Mini-DIN to Lightning cable to the iRig Stomp I/O port and to the iOS device port.
4