IK Multimedia AmpliTube X-DRIVE User Manual page 46

AmpliTube X-DRIVE
BYPASS MODE
Sets the bypass technology for the pedal.
• TRUE: selects the true bypass technology.
• BUFFER: selects the buffered bypass technology.
OPERATION MODE
Sets the operative mode of the pedal to be used for live gigs or as an audio interface.
• LIVE: in live mode, the audio signal is taken from the analog jack inputs, processed by the DSP and sent to
all outputs.
• INTERFACE: in interface mode, the signal is taken from the analog jack inputs, processed, and then sent
to the USB outputs to a computer.
Then the signal coming out from the computer goes back into the pedal in its USB inputs and sent to the
OUTPUT (left) & CAB SIM OUT (right) outputs, which can be connected to a monitoring system.
See the Interface Mode paragraph to learn more.
FACTORY RESET
After a confirmation this option resets the pedal to its factory status.
FW VERSION
Displays the currently installed firmware version.
46
Global Setup