Tuner Operations; Listening To Fm/Am Radio - Sony STR-DA5200ES Operating Instructions Manual

Tuner Operations

Listening to FM/AM radio

You can listen to FM and AM broadcasts
through the built-in tuner. Before operation,
make sure you have connected the FM and
AM antennas (aerials) to the receiver
(page 35).
Tip
The tuning scale for direct tuning is shown below.
• FM band 50 kHz
• AM band 9 kHz
Automatic tuning
4
1
Connect a TV monitor to this
receiver.
Refer to "3: Connecting the monitor for
displaying menus" (page 19).
2
Turn on the receiver and the TV.
3
Press RECEIVER to enable
receiver operation.
4
Press ON SCREEN.
The menu list of this receiver appears on
the TV screen. Press MENU if the menu
list does not appear on the TV screen.
5
Press V/v repeatedly to select
"FM" or "AM," then press
b.
2
3
6
Press V/v to select "Auto
Tuning," then press
7
Press V/v.
Press V to scan from low to high, press v
to scan from high to low.
The receiver stops scanning whenever a
5-7
station is received.
In case of poor FM stereo
MENU reception
1
Press OPTIONS.
2
Press V/v to select "FM Mode," then
press
3
Press V/v to select "MONO," then press
.
.
.
or
77 GB