Adjusting The Sound Effect - Sony STR-DA5200ES Operating Instructions Manual

Multi channel av receiver
Hide thumbs Also See for STR-DA5200ES:
Table of Contents

Advertisement

Notes
• The sound fields for music and movies do not work
in the following cases.
– MULTI IN is selected.
– Input signals of which the sampling frequency is
more than 48 kHz are being received.
– The multi-channel PCM signals are received via
an HDMI IN jack.
• If you set up the sound field during DTS 96/24
signal reception, the signal will be played back
only at 48 kHz.
• The effects provided by the virtual speakers may
cause increased noise in the playback signal.
• When listening with sound fields that employ the
virtual speakers, you will not be able to hear any
sound coming directly from the surround speakers.
• When one of the sound fields for music is selected,
no sound is output from the sub woofer if all the
speakers are set to "LARGE" in the Auto
Calibration settings menu. However, the sound will
be output from the sub woofer if the digital input
signal contains L.F.E. signals, or if the front or
surround speakers are set to "SMALL," the sound
field for movie is selected, or "Portable Audio" is
selected.
• The surround back decoding mode does not
function while a sound field for music is selected
(page 67).
Tips
• Sound fields with D CS marks use DCS
technology. See "Glossary" (page 121).
• When the sound field's DCS mark is selected,
the Digital Cinema Sound lamp lights up on the
display.
To turn off the surround effect
for MOVIE/MUSIC
Select "2CH STEREO" or "AUTO" in the
Surround settings menu.
Adjusting the sound
effect
Parameter that allows custom settings provides
a "Custom Settings" menu that can be used to
make advanced adjustments.
1
Choose the sound field
(page 58).
2
Press b to select "Custom
Settings," then press
2-3
.
continued
63
GB

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents