Sony STR-DA3700ES Operating Instructions Manual page 122

• There may be content that is not played
back or displayed even if that content is
defined in the DLNA guidelines.
Cannot access the receiver from "ES
Remote" or the DLNA controller.
• Make sure the controller you want to use is
set to "Allow" in "Renderer Access
Control" (page 96).
• If you set "Auto Access Permission" to
"On" in "Renderer Options" (page 96),
any controller detected can be available
automatically.
• Is the network controller listed on
"Renderer Options," and is it set to
"Allow"?
If the box is not checked, check the box for
"Auto Access Permission," and return to
the home menu. Then, operate the receiver
using the network controller once, and
then uncheck the box for "Auto Access
Permission," if necessary.
• If the network controller is a computer
software controller, is the software filtered
by antivirus software or firewall software?
Permit UPnP communications between
the software and the receiver. For details,
refer to the operating instructions of the
antivirus software, firewall software, or
network controller software.
Internet video
The picture/sound is poor/certain
programs display with a loss of detail,
especially during fastmotion or dark
scenes.
• Picture/sound quality may be poor,
depending on Internet content providers.
• Picture/sound quality may be improved by
changing the connection speed. Sony
recommends a connection speed of at least
2.5 Mbps for standard definition video and
10 Mbps for high-definition video.
• Not all videos contain sound.
The picture is small.
• Press V to zoom in.
122
GB
Cannot play back content.
• Some Internet content requires registration
via a computer before it can be played.
"BRAVIA" Sync ("Control for
HDMI")
The Control for HDMI function does not
work.
• Check the HDMI connection (page 24, 26,
28, 30).
• Make sure "Control for HDMI" is set to
"On" in the HDMI Settings menu.
• Make sure the connected equipment is
compatible with the Control for HDMI
function.
• Check the Control for HDMI settings on
the connected equipment. Refer to the
operating instructions of the connected
equipment.
• If you change the HDMI connection,
connect/disconnect the AC power cord
(mains lead), or there is a power failure,
repeat the procedures of "Preparing for the
"BRAVIA" Sync" (page 70).
• The types and the number of equipment
which can be controlled by the "BRAVIA"
Sync are restricted in the HDMI CEC
standard as follows.
– Recording equipment (Blu-ray Disc
recorder, DVD recorder, etc.): up to 3
equipment
– Playback equipment (Blu-ray Disc
Player, DVD player, etc.): up to 3
equipment
– Tuner-related equipment: up to 4
equipment
– AV receiver (audio system): up to 1
equipment