Sony STR-DA3700ES Operating Instructions Manual page 121

Erroneous display.
• The data stored in the USB device may
have been corrupted.
• The character codes that can be displayed
by this receiver are as follows:
– Upper case (A to Z)
– Lower case (a to z)
– Numbers (0 to 9)
– Symbols (' < > * + , – . / @ [ \ ] _ ')
Other characters may not be displayed
correctly.
It takes a long time before playback
starts.
• The reading process can take a long time
in the following cases.
– There are many folders or files on the
USB device.
– The file structure is extremely complex.
– The memory capacity is excessive.
– The internal memory is fragmented.
Thus, we recommend following the
guideline.
– Total files per folder: 500 or less
iPhone/iPod
The iPhone/iPod cannot be charged.
• Check that the receiver is turned on.
• Make sure the iPhone/iPod is connected
firmly.
The iPhone/iPod cannot be operated.
• Check that you have removed the protect
case of the iPhone/iPod.
• Depending on the contents of the iPhone/
iPod, it may take time to start playback.
• Disconnect the iPhone/iPod and connect
the iPhone/iPod again.
• You are using an unsupported iPhone/
iPod. See "Compatible iPhone/iPod
models" (page 54) for the supported
device types.
The ring volume of the iPhone does not
change.
• Adjust the ring volume using the controls
on the iPhone.
Network
Cannot connect to the network.
• Check the network connection (page 39)
and the Network Settings menu (page 96).
Cannot find the server.
• Search the server using "Connection
Server Settings" in the Network Settings
menu (page 96).
• Check the following:
– Is the router turned on?
– If there is another device between the
receiver and the router, check that
device is turned on.
– Are all of the cables connected correctly
and securely?
– Is the settings to make sure that they
match the router's settings (DHCP or
fixed IP address)?
• When using a computer, check the
following:
– The built-in firewall settings for the
computer's operating system.
– The firewall settings of your security
software. To check the firewall settings
of your security software, refer to your
security software's Help section.
• Register the receiver with the server. For
details, refer to the instructions supplied
with the server.
• Wait for a few moments, and then try
connecting to the server again.
Cannot find or play back the content on
the server.
• On the "My Music," "My Photo," and "My
Video" screens, the receiver displays only
the content that can be played back with
the receiver from among the content
offered by the server within the DLNA
guidelines.
continued
121 GB