Sony STR-DA3700ES Operating Instructions Manual page 110

2
While the RM SET UP button is
flashing, press the input button
(including the TV button) of the
equipment you want to control.
For example, if you are going to control a
VCR connected to VIDEO 1 IN jack,
press VIDEO 1.
RM SET UP and SHIFT light up.
If you press the button for an equipment
of which you cannot program the remote
control, such as TUNER or SOURCE,
etc., the RM SET UP button keeps
flashing.
3
Press the numeric buttons to
enter the numeric code.
If more than one code exists, trying
entering the first one which corresponds
to the equipment.
Note
Only the codes in the 500's are valid for the TV
button.
4
Press ENT/MEM.
Once the numeric code has been verified,
the RM SET UP button flashes twice and
the remote control automatically exits the
programming mode.
To cancel programming
Press RM SET UP during any step.
110
GB
The numeric codes
corresponding to the equipment
and the maker of the equipment
Use the numeric codes in the tables below to
program non-Sony equipment and also Sony
equipment that the remote control is initially
unable to operate. Since the signal from the
remote control received by the equipment
differs by its model and the year, more than
one numeric code may be assigned to an
equipment. If you fail to program your remote
control using one of the codes, try using other
codes.
Notes
• The numeric codes are based on the latest
information available for each brand. There is a
chance, however, that your equipment will not
respond to some or all of the codes.
• All of the input buttons on this remote control may
not be available when used with your particular
equipment.
To control a CD player
Maker
SONY
DENON
JVC
KENWOOD
MAGNAVOX
MARANTZ
ONKYO
PANASONIC
PHILIPS
PIONEER
TECHNICS
YAMAHA
To control a DAT deck
Maker
SONY
PIONEER
To control a tape deck
Maker
SONY
Code(s)
101, 102, 103
104, 123
105, 106, 107
108, 109, 110
111, 116
116
112, 113, 114
115
116
117
115, 118, 119
120, 121, 122
Code(s)
203
219
Code(s)
201, 202