Download
Share
Print this page
Ceramicspeed Oversize Pulley Wheel System Mounting & Maintenance
  1. Manuals
  2. Brands
  3. Ceramicspeed Manuals
  4. Bicycle Accessories
  5. Oversize Pulley Wheel System
  6. Mounting & maintenance

Ceramicspeed Oversize Pulley Wheel System Mounting & Maintenance

For shimano da 9200
Hide thumbs
1
2
3
4
5
6
7
8
9

Advertisement

Quick Links

Download this manual
Mounting &
Maintenance
Oversize Pulley Wheel System
for Shimano DA 9200

Advertisement

loading

Related Manuals for Ceramicspeed Oversize Pulley Wheel System

Summary of Contents for Ceramicspeed Oversize Pulley Wheel System

  • Page 1 Mounting & Maintenance Oversize Pulley Wheel System for Shimano DA 9200...

  • Page 2: Maintenance

    OSPW System horizontally to ensure that the oil reaches the Oversized Pulley Wheel bearings. We recommend the use of CeramicSpeed Oil on the OSPW System. This can be purchased from the CeramicSpeed dealers worldwide or from our webshop.

  • Page 3: Tools Required

    Upper pulley Lower pulley Cage pivot Front cage plate Pulley wheel lubrication points Tools required For the installation of your new CeramicSpeed Oversized Pulley Wheel DA 9200 you will need the following tools: A. Chain Tool B. T10 Torx Screwdriver ®...
  • Page 4 Mounting Manual To ensure the very best in riding performance it is vital that your new OSPW System is mounted correctly. Follow these instructions to install your OSPW System for Shimano DA 9250 with integrated stop tower: Begin with your bike mounted in a stand and remove the rear wheel.
  • Page 5 Keep the aside as you will reuse these for the installation of the OSPW System. Unpack the CeramicSpeed OSPW System. Place the original spring and plastic spacer over the mounting post of the OSPW System in the same manner they were removed from the stock cage.
  • Page 6 Rotate the derailleur body back, align the mounting post of the OSPW System to the back of the derailleur body with the cage pointing to the front of the bike. Align the tension spring and plastic spacer with the slot on the derailleur body and insert until the cage is flush to the derailleur.

  • Page 7: Chain Length

    Chain length Test the present chain length acc. to the description below. If it turns out to be necessary to change the chain length, follow the description below. STEP 1: Place the chain on the smallest cog on the cassette and the small front chain ring.

  • Page 8: Spring Tension

    STEP 3: With the chain now cut to length it is important to test the clearance of the OSPW System when the rear derailleur is set in the largest cog on the cassette. Just as the arrow indicates the cage should be able to rotate counter clockwise.
  • Page 9 Single Bearings We are committed to manufacturing and delivering the best ceramic bearing products in the industry. Should your CeramicSpeed product not live up to your expectations, and this is caused by defects in materials and/or workmanship, we encourage you to contact us.