Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Ceramicspeed Manuals
  4. Bicycle Accessories
  5. OSPW X
  6. Mounting & maintenance

Ceramicspeed OSPW X Mounting & Maintenance

For sram rival & force 1 type 3
Hide thumbs Also See for OSPW X:
1
2
3
4
5
6
7
8

Advertisement

Quick Links

Download this manual
Mounting &
Maintenance
OSPW X
For SRAM Rival & Force 1 Type 3

Advertisement

loading

Related Manuals for Ceramicspeed OSPW X

Summary of Contents for Ceramicspeed OSPW X

  • Page 1 Mounting & Maintenance OSPW X For SRAM Rival & Force 1 Type 3...
  • Page 2 The cage is NOT compatible with Type 2.1. Type 2.1 Type 3 Cassette sizes: OSPW X Systems support from 10 to max. 42 teeth. It is possible to use all combinations between these limits. It is NOT possible to use a 50 tooth cassette. Tools:...

  • Page 3: Maintenance

    CeramicSpeed dealers worldwide or from our webshop. Watch our maintenance video on ceramicspeed.com in the Support section. When travelling, your OSPW X System will not fit in the bike travelling bag. We recommend that you dismount the whole rear derailleur and pack it aside.
  • Page 4 To ensure the very best in riding performance it is vital that your new OSPW X System is mounted correctly. Follow these instructions to install your OSPW X System for SRAM Rival & Force 1 Type 3. Rotate the stock pulley cage forward and engage the Cage Lock.
  • Page 5 Remove the plastic cap if it did not come off with the derailleur cage and set aside (not to be used with OSPW X). You should now see the pulley cage tension spring. Unbox the OSPW X and remove the silver CeramicSpeed stop screw with a 2,5mm Allen key.

  • Page 6: Chain Length

    Chain length If you are using a 44 tooth or larger chain ring you may not be able to overlap the ends of the chain for measurment. You do not need to add any links to a stock chain, a full length chain (114 links for SRAM, 116 links for KMC) is sufficent for use.
  • Page 7 (always the small cog on the cassette). STEP 3: With the chain now cut to length it is important to test the clearance of the OSPW X System when the rear derailleur is set in the largest cog on the cassette. Just as the arrow indicates the cage should be able to rotate counter clockwise.
  • Page 8 Single Bearings We are committed to manufacturing and delivering the best ceramic bearing products in the industry. Should your CeramicSpeed product not live up to your expectations, and this is caused by defects in materials and/or workmanship, we encourage you to contact us.