Download
Share
Print this page
Ceramicspeed OSPW X Mounting & Maintenance
  1. Manuals
  2. Brands
  3. Ceramicspeed Manuals
  4. Bicycle Accessories
  5. OSPW X
  6. Mounting & maintenance

Ceramicspeed OSPW X Mounting & Maintenance

For sram eagle mechanical and axs
Hide thumbs Also See for OSPW X:

Advertisement

Quick Links

Download this manual
Mounting &
Maintenance
OSPW X
For SRAM Eagle Mechanical and AXS

Advertisement

loading

Related Manuals for Ceramicspeed OSPW X

Summary of Contents for Ceramicspeed OSPW X

  • Page 1 Mounting & Maintenance OSPW X For SRAM Eagle Mechanical and AXS...

  • Page 2: Extended Maintenance

    OSPW System horizontally to ensure that the oil reaches the Oversized Pulley Wheel bearings. We recommend the use of CeramicSpeed Oil on the OSPW System. This can be purchased from the CeramicSpeed dealers worldwide or from our webshop.

  • Page 3: Tools Required

    Cage pivot Front cage plate Rotation stop screw Tools required For the installation of your new CeramicSpeed Oversized Pulley Wheel X for SRAM Eagle Mechanical & AXS you will need the following tools: A: 2,5mm Allen key C: 3mm Allen key...
  • Page 4 Derailleur compatibility The OSPW X cages fits all Eagle derailleurs regardless of the cage length. The cage compatibility is specific to either mechanical derailleurs, or a separate system for Eagle AXS derailleurs. The installation and setup is slightly different between the mechanical and AXS systems, these differences are called out below.
  • Page 5 Mounting Manual To ensure the very best in riding performance it is vital that your new OSPW X System is mounted correctly. Follow these instructions to install your OSPW X System for SRAM Eagle Mechanical and AXS: Begin with your bike mounted in a stand.
  • Page 6 Remove the plastic cap if it did not come off with the derailleur cage and set aside (Not to be used with OSPW X). You should now see the pulley cage tension spring. Unbox the OSPW and remove the silver CeramicSpeed stop screw with a 2,5mm Allen key (to be reused).
  • Page 7 Once the spring tension setting is selected, align the OSPW X, spring and derailleur body together. Mechanical and AXS GX: Install the factory cage mounting bolt and torque to 4Nm*. AXS XX1 and X01: Install the included Ceramic- Speed mounting bolt and torque to 4Nm*.

  • Page 8: Chain Length

    Chain length If you are using a 44 tooth or larger chain ring you may not be able to overlap the ends of the chain for measurment. You do not need to add any links to a stock chain, a full length chain is sufficent for use. Recommendation on upper pulley clearance on the largest cog (adjusting of B-limit) = 10-15mm depending on cassette size.
  • Page 9 STEP 3: With the chain now cut to length it is important to test the clearance of the OSPW X System when the rear derailleur is set in the largest cog on the cassette. Just as the arrow indicates the cage should be able to rotate counter clockwise.

  • Page 10: Warranty Program

    Learn more on ceramicspeed.com - Support - Warranty Program We are committed to manufacturing and delivering the best ceramic bearing products in the industry. Should your CeramicSpeed product not live up to your expectations, and this is caused by defects in materials and/or workmanship, we encourage you to contact us.