Advertisement
•
Keep away from children, pets and clothing.
•
Never leave the extractor on when you go to sleep or leave the area.
•
Never use or store flammable liquids (such as gasoline) around the extractor. The flammable vapors can flow from one part of
the room to another and be ignited by an electrical spark.
•
Place at least three feet away from objects such as bedding, furniture and drapes. Do not place where towels or other objects
could fall on the extractor and start a fire.
•
Use extractor on the floor or bench top. Never place on furniture, since unit may fall , which could result in a fire or shock
hazard. Do not use in wet or moist places, such as bathrooms; corrosion or other damage to parts in the unit may lead to a fire
or shock hazard.
•
Do not hide cords under rugs or carpets. Placing anything on top of the cord or unit as it could cause the cord or machine to
overheat, and can cause a fire.
•
Do not use an extension cord unless absolutely necessary. Using a light-duty, household extension cord with high-wattage
appliances can start a fire. If you must use an extension cord, it must be marked #14 or #12 AWG; this tells the thickness or
gauge of the wire in the cord. Do not use a cord marked #16 or #18 AWG. Only use extension cords bearing the label of an
independent testing laboratory such a U.L. or E.T.L.
•
Be sure the plug fits snugly in the outlet. Since a loose plug can overheat, have a qualified repairman replace the worn-out
plug or outlet. Since extractor draw lots of power, the cord and plug may feel warm. If the plug feels hot, unplug the heater
and have a qualified repairman check for problems. Using an extractor with a hot cord or plug could start a fire.
•
If a extractor is used on an outlet protected by a ground fault circuit interrupter (GFCI) and the GFCI trips, do not assume
the GFCI is broken. Because GFCls protect the location where leakage currents can cause a severe shock, stop using the
extractor and have it checked, even it if seems to be working properly.
•
Broken extractor should be checked and repaired by a qualified service center. Do not attempt to repair, adjust or replace
parts yourself as this will void warranty.
NS022219
9
Safety
Version 2.0
Advertisement
