Assembling The Finder Unit - Canon PowerShot A30 Service Manual

(1)-2
FINDER UNIT

2.13 Assembling the FINDER UNIT

(1) Assembling the FINDER UNIT
1. Apply the voltage (DC 2.5V) across the motor terminal to drive the motor until the motor stops and the
BARREL fully comes out.
2. Move the SLIDER fully to the top of the BARREL and secure it with the two screws.
3. Apply the voltage (DC 2.5V) across the motor terminal to drive the motor until the motor stops and the
BARREL is full housed.
(1)-1
DC2.5V
(1)-1
The SLIDER must have been moved
fully to the top of the BARREL.
e
Fig. 3-15 Assembling the FINDER UNIT
3-15
CHAPTER 3. REPAIR INSTRUCTION
BARREL
(1)-2
SLIDER
(1)-3
FINDER UNIT
DC2.5V
(1)-3
BARREL