Installation - Frigidaire PRMC2285AF Use & Care Manual

8

INSTALLATION

Tools Necessary:
Phillips Head
or
Quadrex Head
Screwdriver
This Use & Care Manual provides general
installation and operating instructions for
this model. We recommend using a service
or kitchen contracting professional to
install the refrigerator. Use the refrigerator
only as instructed in this Use & Care
Manual. Before starting the refrigerator,
follow these important first steps.
Location
• Choose a place that is near a
grounded, non-GFCI, electrical outlet.
Do Not use an extension cord or an
adapter plug.
• If possible, place the refrigerator
out of direct sunlight and away from
the range, dishwasher, or other heat
sources.
• The refrigerator must be installed
on a floor that is level and strong
enough to support a fully loaded
refrigerator.
• Consider water supply availability for
models equipped with an automatic
ice maker.
CAUTION
Do Not install the refrigerator where
the temperature will drop below 55°F
(13°C) or rise above 110°F (43°C).
The compressor will not be able to
maintain proper temperatures inside
the refrigerator.
(OR)
AND
6mm
Allen Wrench
AND
8mm Socket
Wrench
Installation
Allow the following clearances for ease
of installation, proper air circulation, and
plumbing and electrical connections:
Sides & Top ⅜" (9.5 mm)
Back

NOTE
If the refrigerator is placed with the
door hinge side against a wall, allow
additional space so the door can be
opened wider.
Door opening
The refrigerator should be positioned
to allow easy access to a counter
when removing food. For best use of
refrigerator drawers and freezer baskets,
the refrigerator should be in a position
where both can be fully opened.
OR
OR
⅜" Fixed
Adjustable
Wrench
1" (25.4 mm)
Wrench