Frigidaire PRMC2285AF Use & Care Manual page 11

7. To gain access to lower hinge, drawer
will need to be extended. Unscrew the
three lower hinge screws and slide the
hinge inwards.
Lower Hinge Removal
8. To reinstall doors, reverse procedure.
IMPORTANT
Make sure water line tubing goes
through hole at top of dispenser pocket.
There is also a metal wrap on the tubing
to prevent damage from the hinge rub-
bing against it. This needs to be fixed
back around the tube in the proper loca-
tion upon reinstallation (just as long as
the tube is protected from the hinge).

NOTE
When reinserting the water tube and
replacing the top hinge cover, use care
to be sure the tube does not kink.
Once both doors are in place, ensure they
are aligned with each other and level (Ref-
erence the Installation section for more
details), and replace the top hinge cover.
DOOR REMOVAL
Prevent doors from touching walls
If your refrigerator doors are touching
objects such as a wall or a countertop
located close to the side of the appliance,
the doorstop can be replaced with the
provided Optional Door Opening Angle
Feature located in your crisper drawer.
This is to reduce the maximum door
opening angle for both doors or for one
specific door.

NOTE
Optional Door Opening Angle Feature
Parts are identified:
LH—Left Hand, to apply on Left Door
RH—Right Hand, to apply to Right Door
Optional Door Opening Angle Feature
Door Stop Default
Maximum Opening Angle: 123°
11