Frigidaire PRFG2383AF Getting Started

GETTING
WITH YOUR MULTI-DOOR REFRIGERATOR

BEFORE YOU START

SET UP YOUR REFRIGERATOR

Remove tape and glue residue from surfaces before turning on the refrigerator. Choose a place
near a grounded electrical outlet, allowing for clearances for ease of installation, proper circulation,
and plumbing and electrical connections.

BEFORE OPERATING FOR THE FIRST TIME

Clean the inside of your appliance before using it. See CARE AND CLEANING in your Use & Care
Manual. To ensure safe food storage, allow the appliance to operate with the door closed for at
least 8 hours before loading it with food.
YOU'RE IN CONTROL

Appliance Control Display

For the first 24 hours, we recommend setting the temperature at 37˚F (3˚C) for the fresh food compartment and
0˚F (-18˚C) for the freezer. After 24 hours, you can adjust the temperature control as desired.
*Control display varies by model.
EXTERNAL DISPENSER CONTROL DISPLAY
CHANGE
1
TEMPERATURE
CLEAR
2
ALERTS
FREEZE
3
BOOST
1
2
F/C
4
3 4
ICE MAKER
5
5 6
DEFAULT
6
7
SETTINGS
8
7
WATER FILTER
8
AIR FILTERS

External Water Dispenser Controls

WATER
CRUSHED
CUBES
Select Freezer or Refrigerator
icon to change temperature.
Press +/- buttons to set the
temperature.
Freezer control -6˚F/-21˚C –
range: +6˚F/-15˚C
Refrigerator +34˚F/+1˚C –
control range: +44˚F/+7˚C
Resets any active lit door
open, high temp or power
outage alarms on the
control display.
Activate Freeze Boost prior
to grocery shopping to
lower the temperature and
freeze food faster. Freeze
Boost will remain active for
up to 24 hours.
Touch to toggle display
from Fahrenheit to Celsius.
Press and hold for 3
seconds to turn ice maker
on/off. When indicator is lit,
ice maker is on.
Press and hold for 3
seconds to reset to Factory
settings.
Press and hold to reset after
filter has been replaced,
status shown at right of
button will reset to GOOD.
Press "WATER" to select
water.
Press "CRUSHED" to select
crushed ice.
Press "CUBES" to select
cubed ice.
Toggles dispenser light on
LIGHT
and off.
INTERNAL DISPENSER CONTROL DISPLAY
CHANGE
1
TEMPERATURE
CLEAR
2
ALERTS
FREEZE
3
1 BOOST
2
3 4
F/C
4
5 6
WATER
5
7 DISPENSER
8
DEFAULT
6
SETTINGS
7
WATER FILTER
8
AIR FILTERS
REMEMBER
See your Use & Care Manual for more detailed information
about your appliance.
Select Freezer or Refrigerator
icon to change temperature.
Press +/- buttons to set the
temperature.
Freezer control -6˚F/-21˚C –
range: +6˚F/-15˚C
Refrigerator +34˚F/+1˚C –
control range: +44˚F/+7˚C
Resets any active lit
door open, high temp or
power outage alarms on
the control display.
Activate Freeze Boost
prior to grocery shopping
to lower the temperature
and freeze food faster.
Freeze Boost will remain
active for up to 24 hours.
Touch to toggle display
from Fahrenheit to
Celsius.
When the water
dispenser is turned on
the LED's above Water
Dispenser will illuminate.
Press and hold for 3
seconds to reset to
Factory settings.
Press and hold to reset
after filter has been
replaced, status shown at
right of button will reset
to GOOD.
A20832701 (2109)