Trip-Zone - Idis DC-S6283HRXL Operation Manual

Trip-Zone

Select Trip-Zone to configure trip zone event settings.
With trip zone event enabled, motion detected inside/
outside the selected area will be assumed as an event.
• Sensitivity: Select daytime and nighttime motion
detection sensitivity levels. Higher values will result in
more sensitive motion detection.
• Trip-Zone: Click Setup and define the trip zone using
blocks.
(Select)/ (Unselect): Enable/disable trip zone
-
blocks.
(Single Block): Select/unselect trip zone blocks
-
individually.
(Zone): Select/unselect multiple trip zone blocks.
-
(All): Select/unselect all trip zone blocks.
-
- Trip Direction: Define in which direction the
motion has to occur in order for it to be considered
as an event. Select In for movement occurring from
outside the trip zone in and Out for movement
occurring from inside the trip zone out.
• Motion Ignoring Interval: With Motion Ignoring
Interval configured, no event log or notification is
generated for motions detected during a period of
time following a motion detection event.
• Daytime: Specify when daytime starts and ends. All
other times will be assumed as nighttime.
• Event Action: Select a trip zone event alert action.
- Alarm Out: Select if you wish to generate an alarm
out.
- Send Email: Select if you wish to send an email.
Select the Image Attachment option to attach a
.jpg image of the event detected to the email.
- Remote Callback: Select this option to send a
message to a remote system and then select which
system to send the message to.
• Not supported from the IDIS Web program.
• The camera must be registered to the remote
system in order to use the Remote Callback
feature.
- Audio Alarm: Select this option to generate an
audio alert and then choose an audio file (.wav).
- FTP Upload: Select this option if you wish to
upload images to the FTP server.
- Record: Select this option to record video.
- Move PTZ to: Select a preset position to move the
pan/tilt driver to that position. Preset positions can
be set from the remote program.
• Event Action settings must be configured
correctly in order to perform event actions.
Part 1 - Remote Setup
39