Table of Contents
Advertisement
Part 1 - Remote Setup
Camera
Image Sensor
Configure Image Sensor settings.
• Frame Rate: Set the frame rate of image sesor.
Selecting 30.00 ips limits the frame rate of images for
streaming under Video > Streaming menu to 30.00
ips. Selecting 60.00 ips restricts some settings under
Video > Streaming menu and disables the following
functions: FTP upload, image attachment of emailing,
and WDR.
Streaming settings are reset when changing the
frame rate.
• Mirroring: Select Horizontal Reverse or Vertical
Reverse to flip the image horizontally or vertically.
• Defog: Disables or enables the Defog feature. When it
is enabled, image with a fog is adjusted.
18
White Balance
Configure White Balance settings.
• Preset: Use preconfigured white balance settings.
- Auto: Allow the system to adjust the white
balance automatically. The system will assess the
lighting conditions and adjust the white balance
automatically.
- Hold: Hold the current white balance.
- INCANDESCENT - FLUORESCENT COLD: Select
a lighting type to apply the appropriate white
balance.
If the Preset is Hold and the WDR mode is changed,
a reset is required.
• Manual: Adjust the white balance manually. Adjust
Red and Blue gain values. Greater the value, greater
the intensity of the corresponding color.
If the white balance does not work properly under the
following specific conditions, select Manual or Hold.
- When the surrounding environment of the object is
out of the color temperature correction range
- When the surrounding environment of the object is
dark
- The camera is pointed directly at the fluorescent lamp
or installed in a place where the lighting change is
severe.
Advertisement
Table of Contents
