Table of Contents
Advertisement
NOTE: Child lock is activated/deacti-
vated by pressing the Tablet button (5) for
about 3 seconds. When it is activated, all
leds blink and "CL" is shown on the
Remaining Time Indicator (4) once. When it
is deactivated, all leds and "CL" blink twice.
NOTE: If you have used an extra fea-
ture on the latest washing program, this
feature will remain active also on the next
washing program. If you want to cancel this
feature on the newly selected washing
program, press the Half load (6), Tablet (5)
or Delay (3) buttons until the related leds are
off or turn the machine off with the
On/Off button (1) if any washing program is
not running. Otherwise, if the machine is
running for a washing
program, it is primarily paused and the
cancellation is performed as explained
above.
7.1. Changing a Program
If you would like to change the program
when the machine is already running.
After the program stops, select your
desired program by pressing
Program Selection button.
Start newly selected program by
pressing the Start/Pause button.
The new program will resume the
course of the old program.
Press the Start/
Pause button.
EN - 20
7.2. Cancelling a Program
If you would like to cancel a program
when it is running.
Press the Start/Pause
button for 3 seconds.
During cancellation, the End led
blinks. The machine discharges the
water inside it in about 30 seconds.
When the End led turns on,
switch your machine off by
pressing the On/Off button.
7.2.
Switching the Machine Off
Switch your machine off with On/Off button after
the program has ended and the End led turns
on. Pull the plug out of the outlet. Turn off the
water tap.
NOTE: Do not open the door before
the program ends.
NOTE: At the end of the washing
program, you can leave the door of your
machine ajar to hasten the drying.
NOTE: If the door of the machine is
opened or power is cut off during washing,
the program will continue when the door
is closed or the power is restored.
Advertisement
Table of Contents
