Table of Contents
Advertisement
4.4. Test Strip
Run water
Keep the
through the
strip in the
tap (1min.)
water (1sec)
NOTE: The level is set to 3 as default. If the water is well water or has a hardness level
above 90 dF, we recommend that you use filter and refinement devices.
4.5. Water Hardness Table
Level
German dH
1
0-5
2
6-11
3
12-17
4
18-22
5
23-31
6
32-50
4.6. Water Softener System
The dishwasher is equipped with a water softener which reduces the hardness in the
mains water supply. To find out the hardness level of your tap water, contact your water
company or use a test strip (if available).
4.7. Setting
In order to change the salt level, follow the below steps:
•
Turn on the machine by pressing the On/Off button.
•
Press the Program button for at least 3 seconds immediately after the machine is turned
on.
•
Release the Program button when "SL" is shown. Next, the last setting level is displayed.
•
Press the program button to set the desired level. Each press of the program button
increases the level. Once level 6 has been reached, the next press returns the level to 1.
•
The last selected water hardness level is stored in the memory by turning the machine
off with the On/Off button.
4.8. Detergent usage
Only use detergents specifically designed for domestic dishwashers. Keep your detergents
in cool, dry places out of reach of children.
Add the proper detergent for the selected program to ensure the best performance. The
amount of detergent needed depends on the cycle, load size, and soil level of dishes.
Shake the
strip.
(1min.)
French
British
dF
dE
0-9
0-6
10-20
7-14
21-30
15-21
31-40
22-28
41-55
29-39
56-90
40-63
EN - 10
Wait
Set the hardness level of
your machine.
1
2
3
4
5
6
Indicator
L1 is seen on the display.
L2 is seen on the display.
L3 is seen on the display.
L4 is seen on the display.
L5 is seen on the display.
L6 is seen on the display.
Advertisement
Table of Contents
