Table of Contents
Advertisement
7. THE CONTROL PANEL
9
8
1
2
3
1. On/Off button
2. Program Selection Button
3. Delay Button
4. Remaining Time Indicator
5. Tablet Button
6. Half Load Button
7. Start/Pause Button
8. Rinse Aid Indicator
9. Salt Indicator
10. Washing Step Indicators
a- Washing Step symbol
b- Rinse Step symbol
c- Drying Step symbol
d- End Step symbol
1. On/Off Button
Switch the machine on by pressing the
On/Off button. The On/Off led lights as long
as the machine is on.
If any button is not pressed, the machine
turns off automatically after 15 minutes.
2. Program Selection Button
Select a suitable program by pressing
Program Selection button.
3. Delay Button
You can delay the start time of the program
for 1-2...24 hours by pressing the Delay
button before the program starts. To
activate the delay time, press Start/Pause
button (7). If you want to change the delay
time, first press the Start/Pause button (7)
and then the delay button to select a new
delay time. To activate the new delay time,
press the Start/Pause button (7) again. To
cancel the delay, you need to switch to 0
hour by pressing the Delay button.
If you switch off the machine after selecting
and activating the delay time, the delayed
time is cancelled.
10
7
4
5
EN - 19
4. Remaining Time Indicator program flow
can be monitored via the Wash, Rinse, Dry,
End leds (10) and Remaining Time
Indicator. While the Dry led is on, the
machine remains silent for about 40-50
minutes with respect to the
6
flow of the program you have selected.
5. Tablet Button
Press the Tablet button to activate the Tablet
option when using combined detergent that
contains salt and rinse aid.
6. Half Load Button
Thanks to the half load function in your
machine, you can shorten the durations of
the programmes that you have selected and
reduce the energy and water consumption
by using half load electricity and water.
7. Start/Pause Button
Press the Start/Pause button to start the
selected program. The wash led turns on
and the Remaining Time Indicator shows the
program duration. It also indicates the
remaining time during the program flow. If
you open the door of your machine when
the program is running the duration of the
program pauses, and the Start/Pause led
blinks.
8. Rinse Aid Indicator
When the rinse aid level is low, the rinse aid
lack warning indicator turns on and you
should fill the rinse aid chamber.
9. Salt Indicator
When there is insufficient softening salt, the
salt lack warning indicator turns on and you
should fill up the salt chamber.
10.
Washing Step Indicators
You can monitor the program flow with the
Washing Step Indicators on the control
panel.
•
Wash
•
Rinse
•
Dry
•
End
Advertisement
Table of Contents
