Table of Contents
Advertisement
QUICK START GUIDE
WARNING: Always wear the helmet in the proper
position on your head with the front of the helmet
covering your forehead for maximum protection. Never
wear the helmet tipped back as the helmet will be in
the improper position causing your forehead to be
exposed. All fitment adjustments need to be made with
the helmet in the proper position.
3. Position the helmet low on your forehead
with the buckle under the chin and back
against the throat. The straps should fit
comfortably around both ears.
4. With the strap adjuster in the proper
position, adjust the chinstrap tension
at the buckle. Adjust the tension so the
chinstrap is tight and comfortable by
pulling the chinstrap end through the
buckle to either tighten or loosen as
needed. Always wear the helmet with
the chinstrap buckle fastened and the
chinstrap pulled tight and positioned back
against the throat. With the strap buckled
and the helmet positioned, you should
feel the chinstrap pull firmly against your
chin as you open your mouth. When
properly adjusted the helmet will wrap
around your head and cradle it with firm,
but comfortable pressure.
Advertisement
Table of Contents
