ASSEMBLY INSTRUCTIONS
STEP 5
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
•
Remove screws from the lid handle (8) before assembling to the front door.
•
Flip the front door open and attach the lid handle (8) to the front of the door by inserting 2 BB screws
through the back of the door as shown below.
STEP 6
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
•
Place the flame tamer (4) on to the flame tamer support brackets inside the body of the grill. The 2 oval
shaped holes on either end of the flame tamer (4) will fit on to the pegs on the flame tamer support
brackets. See image below.
8
8
8
4