Advertisement
Quick Links
Model GMRS-1100 (FCC License Required)
Model GMRS-1100 DISPLAY
1. Beep Tone Indicator: Icon appears when beep button confirmation tone is selected;
icon disappears when tone is off.
2. Key Lock Indicator: Icon appears when the keypad is locked. This function disables
keys such as channel up/down and MODE.
3. Monitor Indicator: Icon appears when the Monitor (M) button is pressed and the
channel monitor function is activated.
4 Signal Strength Indicator: Icon appears when a signal is being received. The icon
consists of five bars to indicate the received signal level. The icon also represents
transmit signal power during transmission.
5. Coded Tone Controlled Squelch System (CTC) Indicator: Icon appears when the
CTCSS tone function is active.
6. Large Segment Display: Indicates the channel number in use.
7. Scan Indicator: This function allows the user to scan a channel and/or a tone code 5
second to search for a valid signal.
8. Emergency Indicator: EMG Icon appears when the EMG button is pressed.
(The frequency is NOT monitored by authorities).
9. Battery Level Indicator: Icon indicates the battery charge level.
10.Hi/LO Indicators: Appropriate icon appears when the transmit power is set to
desired output power.
11. RogerBeep Tone On/Off Indicator: This icon appears when the Roger Beep tone
is on, and disappears when tone is not in use.
12. Small Segment Display: Displays the CTCSS tone option in the channel from
(00-38).
GMRS1100 Users Manual
Advertisement
Related Manuals for Audiovox GMRS1100
Summary of Contents for Audiovox GMRS1100
- Page 1 GMRS1100 Users Manual Model GMRS-1100 (FCC License Required) Model GMRS-1100 DISPLAY 1. Beep Tone Indicator: Icon appears when beep button confirmation tone is selected; icon disappears when tone is off. 2. Key Lock Indicator: Icon appears when the keypad is locked. This function disables keys such as channel up/down and MODE.
- Page 2 Powering the transceiver: Your GMRS 1100 radio transceiver operates on four AAA batteries. Alkaline batteries will provide slightly better performance than rechargeable batteries. Only Audiovox approved rechargeable batteries can be recharged in the radio transceiver using the optional charging stand.
- Page 3 GMRS-1100 OPERATIONAL MODES NOTE: To switch between GMRS and Weather Band modes, press and hold the Mode button for 2 seconds. To differentiate between operating modes, look for HI or LO indication below the battery power level indicator when in GMRS mode. In Weather Band mode, these indications are not present.
- Page 4 Pressing this button will set the transceiver to the channel 10, 462.6750 MHZ). External Speaker (SPK)/Microphone (MIC) Jacks (6) This set of jacks accepts an Audiovox headset/microphone connector for total hands-free operation. Scan/Lock Button (13) Press this Button momentarily to enable or disable the scan mode. Press and hold Button for more than 1 second to lock or unlock the key pad, except PU and Monitor (M).
- Page 5 The GMRS-1100 has 22 channels (frequencies) (1-22) indicated by the large digits on the LCD display panel. Channels 1 through 14 are the same frequency as FRS channels 1 through 14. Communication with Audiovox FRS and compatible units is possible on these seven channels. Before transmitting on the selected channel, press the Monitor (M) Button (2) to check the activity on that channel.
- Page 6 sub-channel number. - Then press the Up or Down button to select the desired sub-channel for use. - Press the Power On/Oft button momentarily to confirm selection. The CTCSS mode can be turned off by selecting the oF icon as the setting. NOTE: To communicate with other GMRS units, they must be switched to the same channel and CTCSS subcode.
- Page 7 Dual Watch Mode This feature allows you to monitor two channels at the same time. While in dual watch mode, the unit will continuously monitor both the primary and dual watch channel. Received signals will be played for S seconds, then the unit will resume scanning the two channels.
- Page 8 Roger Beep Tone The Roger Beep is a tone which is automatically transmitted whenever the PTT button is released. This tone alerts the receiving party that the transmission has been terminated intentionally. To enable and disable the Roger Beep tone: - From GMRS standby mode, press the MODE Button 7 times until rb appears on the display with the flashing Roger Beep icon ( ) and On or oF.
-
Page 9: Notes For Good Communication
1. Alkaline Batteries - (4 x AAA size) 2. Rechargeable Ni-MH Batteries - (Rechargeable Ni-MH batteries and Charging Stand not included). Use only Audiovox approved rechargable batteries. NOTE: To extend battery life, avoid overcharging the batteries. NOTES FOR GOOD COMMUNICATION 1. -
Page 10: Troubleshooting
explosives or in areas labeled "Blasting Area". Premature or accidental detonation may result. • Do not attempt to modify or in any way increase the output of this transceiver Its output is designed to meet the legal limits set by the FCC. •... -
Page 11: Technical Specifications
Technical Specifications: General Frequency Range GMRS (22 Channels) 462.5500 - 467.71250 MHz Channel Spacing 12.5kHz Privacy Codes38 for each main channel Dimensions (W x H x D) 2.l0in x 3.86in x l.l0in (Without Antenna) 53.4mm x 98mm x28 mm Power Supply] Power Source Alkaline Batteries, AAA (4), 6 VDC Ni-MH rechargeable, AAA (4),... -
Page 12: Main Channel Frequencies
This transceiver complies with FCC regulations for use in the United States of America. Use in other countries may be prohibited or restricted by local regulation. Please check with the local regulating agency before using this device outside the United States of America. - Page 13 CTCSS Tone Code Frequencies (in Hz) CTCSS Freq. Hz CTCSS Freq. Hz 67.0 131.8 71.9 136.5 74.4 141.3 77.0 146.2 79.7 151.4 82.5 156.7 85.4 162.2 88.5 167.9 91.5 173.8 94.8 179.9 97.4 186.2 100.0 192.8 103.5 203.5 107.2 210.7 110.9 218.1 114.8...
Need help?
Do you have a question about the GMRS1100 and is the answer not in the manual?
Questions and answers