Table of Contents
Advertisement
You can choose a default operation for your factual security or management
consideration:
Defined items in MAC list are PERMIT to connect AP, others are DENIED.
Defined items in MAC list are DENIED to connect AP, others are PERMIT.
Click "Apply" when you have selected,
MAC: Enter the MAC Address of a station.
Description: Enter the Comment of station.
Click "Add". Then this wireless station will be added into the" Current
Access Control List" below.
If you want to remove some MAC address from the "Current Access Control
List ", select the MAC addresses you want to remove in the list and then
click "Delete ".
6.4.4 WDS Set
You can set the wireless Bridge MAC here. The bridge uses to connect between
more than 2 APs.
6.4.5 Advanced Wireless Settings
This tab is used to set up the AP's advanced wireless functions. These settings
should only be adjusted by an expert administrator as incorrect settings can
reduce wireless performance.
Wireless Access Point User manual
Figure 30
Page 28 of 28
Advertisement
Table of Contents
