Appendix B: Set Static Ip For Computer - Netis WF2222 Quick Installation Manual

Appendix B: Set Static IP for Computer

Please make sure that your computer is connected to netis Access Point with an
Ethernet cable (or wirelessly).
Then you may manually set the IP address of the wired (or wireless) network adapter
on your computer as below.
IP Address/ IPv4 Address: 192.168.1.x (1<x<254)
Subnet Mask: 255.255.255.0
Default Gateway/ Router: 192.168.1.254
Primary DNS: 192.168.1.254 or 8.8.8.8
Secondary DNS: Null
For Window 8/7/Vista
1) Go to "Setting" (Win 8)/"Start" (Win 7/Vista)>"Control Panel".
2) Left-click on "Network and Internet">"Network and Sharing Center">"Change
adapter settings" (Win 8/7)/ "Manage network connections" (Win Vista).
3) Right-click on "Local Area Connection" (wired adapter)/ "Wireless network
Connection" (wireless adapter) and left-click on "Properties".
4) Double-clicked on "Internet Protocol Version 4 (TCP/IPv4)".
5) Select "Use the following IP address" and enter the address manually in
corresponding field, then click OK.
For Window XP/2000
1) Go to "Start">"Control Panel".
2) Left-click on "Network and Internet Connections">"Network Connections".
3) Right-click on "Local Area Connection" (wired adapter)/ "Wireless network
Connection" (wireless adapter) and left-click on "Properties".
4) Double-clicked on "Internet Protocol (TCP/IP)".
5) Select "Use the following IP address" and enter the address manually in
corresponding field, then click OK.
For MAC OS
1) Click on the "Apple" menu> "System Preferences".
2) Click on "Network" icon.
3) Click on "Ethernet" (wired adapter)/ "Airport" (wireless adapter) in the left side
box and click on "Advanced" in the lower right corner.
4) In the top options, select "TCP/IP".
5) In the pull-down menu next to "Configure Ipv4", select "Manually" and enter the
address manually in corresponding field, then click Apply.
netis Wireless N Ceiling-Mounted Access Point Quick Installation Guide
16