2.4 Windows Vista
Installing the driver
■
First install the USB cable driver software.
When installing the driver software for the USB cable from the support software installation
folder, start the work from Step 2 after Windows has started.
NOTE
Start Windows and insert the support software installation disc into the
1
CD-ROM drive of your PC.
If the setup program appears, click the [Exit] button to end the program.
Plug the USB cable into the USB port on your PC.
2
The "Found New Hardware" dialog box appears. Click "Locate and install driver
software (recommended)".
"Found New Hardware Wizard" dialog box
Example: For KBG-M538F USB Serial Port
Click
When plugging the KCA-M538F USB Serial Port into the USB port of your PC, "KCA-
M538F-000" is shown.
NOTE
2.4 Windows Vista
2. Driver software setup
19
Need help?
Do you have a question about the KCA-M538F and is the answer not in the manual?
Questions and answers