Yamaha KCA-M538F User Manual page 20

2.3 Windows XP
"Found New Hardware Wizard" dialog box
When you use the driver software for the USB cable that has been copied into the support
software installation folder to install the driver software, select [Install from a list or specific
location (Advanced)] and click the [Next] button.
In the window for search and installation options, select Search for the best driver in these
locations , specify [Driver] - [WinXP-Vista-7-8.1] folder in the support software installation
NOTE
folder, and click [Next].
For details about support software installation folders, see "2.1 USB cable applicable support
software".
Select the method for installing the driver software.
6
When the "Hardware Installation" dialog box appears, click [Continue Anyway] to
continue the installation.
The message appears stating "The software you are installing for this hardware has not
passed Windows Logo testing to verify its compatibility with ... . Continuing your installation of
this software may impair or destabilize the correct operation of your system ... .". But this will
TIP
not affect the PC, so click
Finish the driver installation.
7
The "Completing the Found New Hardware Wizard" window appears. Remove the
support software installation disc from the CD-ROM drive and click the [Finish]
button.
16
2. Driver software setup
Select
[ ]
Continue Anyway .
Click