Epson SG-WRITERII Applications Manual page 14

2)
Unwritable Frequencies
"This frequency need to be confirmed by EPSON".
answer ..." error is displayed in red in the Message bar, and Writer button is write disabled
this is displayed.

This can change due to setting conditions (Package/Rank).
6-4. Write and Test
When this button is clicked, the Write and Test dialog appears, and Write & Test
1) (Write & Test)
This button is for Write and Test (Function Test).
 Fcalc
Displays written frequency (MHz) and acceptable deviance (ppm).
 Fout
Displays calculated value for output frequency (MHz) and deviance (ppm) from Fcalc.
Less than

Write enabled

Write disabled
2) (Monitor)
This button is for monitoring SG8002/SG8003 after writing. (Write and Data Verification cannot be performed.) Test results
 
are displayed as

Verify Data Function for comparing written data and data read by SG8002/SG8003
 Fout
Function for comparing output frequency and acceptable deviation
1 10
-6
is not displayed.
to the left of the function.
is displayed. Please consult seller. When click OK button, A "No
and Monitor
10
. Writing is not possible while
become possible.
Rev.7.4