The Install Setting Menu - Sony VPL-CX70 Operating Instructions Manual

The INSTALL SETTING Menu

The INSTALL SETTING menu is used for changing the settings of the projector.
INSTALL SETTING
T i l t . . .
V Key s t o n e : Au t o
S i d e S h o t : O n
Au t o F o c u s : O n
I m ag e F l i p : O f f
B a ck g ro u n d : B l u e
Te s t Pa t t e r n : O f f
L a m p M o d e : S t a n d a rd
L e n s C o n t ro l : O n
High Altitude Mode: O f f
S e c u r i t y L o ck : O f f
Setting items Functions
Tilt... Adjusts the position (height) of the projected picture.
V Keystone Corrects the trapezoidal distortion caused by the projection
angle. Select "Auto" for automatic correction, or "Manual"
for manual correction using the </M/,/m key on the
Remote Commander.
When the bottom of the trapezoid is longer than the top
When the top of the trapezoid is longer than the bottom
Side Shot Corrects the horizontal trapezoidal distortion of the picture
using the </M/,/m key on the Remote Commander.
When the right side is longer than the left side (
Set to a higher value (+ direction).
When the left side is longer than the right side (
Set to a lower value (– direction).
Set the adjustment level to "0" if you want to adjust the
picture more widely using "V Keystone" only.
Auto Focus When set to "Off," the focus adjustment does not work
automatically when the projector is turned on.
Image Flip Flips the image on the screen horizontally and/or vertically.
• Off: The image does not flip.
• HV: Flips the image horizontally and vertically.
• H: Flips the image horizontally.
• V: Flips the image vertically.
Background Select the background color of the screen when no signal is
input to the projector. Select "Black" or "Blue."
Normally, set to "Blue."
Test Pattern When set to "On," a test pattern is displayed on the screen
during the "Lens Zoom" adjustment, "Lens Focus," "Side
Shot" or "V Keystone."
38
GB
The INSTALL SETTING Menu
Input-A
: Sets a lower value.
: Sets a higher value.
Initial setting
value
Auto
0
)
)
On
Off
Blue
Off