Summary of Contents for VegaStream Vega 50 FXS SIP
Page 1
Vega 50 FXS (SIP) – R5.1 This document describes how to configure the Vega 50 FXS SIP unit using the web browser interface. The configuration described here will allow the Vega to be rapidly installed and tested. The instructions below will configure the Vega 50 FXS to operate as follows: •...
Page 3
POTS port 8 Power Switch POTS port 1 Before installing your Vega, ensure that you read the VegaStream VoIP Gateways Safety and Compliance Information document. LAN: Using the yellow booted cable connect the LAN port on the Vega to a standard or fast Ethernet hub or switch (10 baseT or 100 baseTx).
13. Technical Support Support information can be found on the VegaStream Support web site www.VegaAssist.com If you require help from VegaStream support personnel, please use the serial interface or telnet into the unit, log in and then type: show support...
Need help?
Do you have a question about the Vega 50 FXS SIP and is the answer not in the manual?
Questions and answers