Download Print this page

Advertisement

Quick Links

This document describes how to configure a Vega 50 FXS H.323 unit using the web browser
interface. The configuration described will allow the Vega to be rapidly installed and tested.
The instructions below will configure the Vega 50 FXS (connected to 8 analogue telephones) as
follows:
Calls made on any of the attached analogue phones will be routed to another gateway;
when sending the call over the LAN, the Vega will prefix the dialled number with a 2 digit
prefix indicating on which port the call was received.
Each of the 8 analogue telephones connected to the Vega will be configured with a 3-digit
extension number 406 to 413. Calls received from the LAN presenting a dialled number in
the range 406 to 413 will be routed to the appropriate telephone.
406
407
POTS Telephones
Version 0.5
For use with Vega 50 FXS – H.323 version 04.01.05.1 T017 or greater.
LAN
Vega 50 FXS
413
26 August 2004
Initial configuration
Vega 50 FXS (H.323)
Standalone mode
IP network
pbx
p
Page 1 of 31
© 2002-2004 VegaStream Ltd.
– R5.1

Advertisement

loading
Need help?

Need help?

Do you have a question about the Vega 50 FXS H.323 and is the answer not in the manual?

Questions and answers

Summary of Contents for VegaStream Vega 50 FXS H.323

  • Page 1 Standalone mode – R5.1 This document describes how to configure a Vega 50 FXS H.323 unit using the web browser interface. The configuration described will allow the Vega to be rapidly installed and tested. The instructions below will configure the Vega 50 FXS (connected to 8 analogue telephones) as follows: •...
  • Page 2 Configure pointer to CD ROM documentation Save Changes Archive Vega Configuration Please also see: Technical Support Version 0.5 26 August 2004 Page 2 of 31 For use with Vega 50 FXS – H.323 version 04.01.05.1 T017 or greater. © 2002-2004 VegaStream Ltd.
  • Page 3 POTS port 8 Power Switch POTS port 1 Before installing your Vega, ensure that you read the VegaStream VoIP Gateways Safety and Compliance Information document. LAN: Using the yellow booted cable connect the LAN port on the Vega to a standard or fast Ethernet hub or switch (10 baseT or 100 baseTx).
  • Page 4 Version 0.5 26 August 2004 Page 4 of 31 For use with Vega 50 FXS – H.323 version 04.01.05.1 T017 or greater. © 2002-2004 VegaStream Ltd.
  • Page 5 Enter the IP address of the Vega into the “Address” field of your web browser. You will then be presented with the login page: Version 0.5 26 August 2004 Page 5 of 31 For use with Vega 50 FXS – H.323 version 04.01.05.1 T017 or greater. © 2002-2004 VegaStream Ltd.
  • Page 6 Enter the default Username and Password Username: admin Password: admin Select On the left hand side menu select Users Version 0.5 26 August 2004 Page 6 of 31 For use with Vega 50 FXS – H.323 version 04.01.05.1 T017 or greater. © 2002-2004 VegaStream Ltd.
  • Page 7 If the web interface is not used for this length of time the Vega will automatically log off the session. This change is only activated by logging out and back into the browser session. Version 0.5 26 August 2004 Page 7 of 31 For use with Vega 50 FXS – H.323 version 04.01.05.1 T017 or greater. © 2002-2004 VegaStream Ltd.
  • Page 8 Optional: If there are any LAN values that need to be set up (e.g. NTP server or tftp server) set them up now, then Select and then click “here” to return Version 0.5 26 August 2004 Page 8 of 31 For use with Vega 50 FXS – H.323 version 04.01.05.1 T017 or greater. © 2002-2004 VegaStream Ltd.
  • Page 9 – back towards this configuration, as this will improve call setup times. Version 0.5 26 August 2004 Page 9 of 31 For use with Vega 50 FXS – H.323 version 04.01.05.1 T017 or greater. © 2002-2004 VegaStream Ltd.
  • Page 10 Firstly, turn off the default profile: In the Profiles section, Profile ID 1 Select Version 0.5 26 August 2004 Page 10 of 31 For use with Vega 50 FXS – H.323 version 04.01.05.1 T017 or greater. © 2002-2004 VegaStream Ltd.
  • Page 11 In the Profiles section, on Profile 2 (the new profile): Select Set Name = Outbound_To_LAN select and then click “here” to return Version 0.5 26 August 2004 Page 11 of 31 For use with Vega 50 FXS – H.323 version 04.01.05.1 T017 or greater. © 2002-2004 VegaStream Ltd.
  • Page 12 In the Profiles section, on Profile 2 (the Outbound_to_LAN profile): Select In the Plans in this Profile section: Select Version 0.5 26 August 2004 Page 12 of 31 For use with Vega 50 FXS – H.323 version 04.01.05.1 T017 or greater. © 2002-2004 VegaStream Ltd.
  • Page 13 ID as the destination telephone number) select and then click “here” to return Version 0.5 26 August 2004 Page 13 of 31 For use with Vega 50 FXS – H.323 version 04.01.05.1 T017 or greater. © 2002-2004 VegaStream Ltd.
  • Page 14 On the left hand side menu select Dial Plan Version 0.5 26 August 2004 Page 14 of 31 For use with Vega 50 FXS – H.323 version 04.01.05.1 T017 or greater. © 2002-2004 VegaStream Ltd.
  • Page 15 Set Destination = IF:<1> ID (telephone) to ring) select and then click “here” to return Version 0.5 26 August 2004 Page 15 of 31 For use with Vega 50 FXS – H.323 version 04.01.05.1 T017 or greater. © 2002-2004 VegaStream Ltd.
  • Page 16 “The Dial Planner” in the Vega Primer. Version 0.5 26 August 2004 Page 16 of 31 For use with Vega 50 FXS – H.323 version 04.01.05.1 T017 or greater. © 2002-2004 VegaStream Ltd.
  • Page 17 Add more codecs so that by default the Vega will handle calls with any of the codecs it supports. In H.245 Capabilities Select Version 0.5 26 August 2004 Page 17 of 31 For use with Vega 50 FXS – H.323 version 04.01.05.1 T017 or greater. © 2002-2004 VegaStream Ltd.
  • Page 18 In H.245 Capabilities Select again Select on H245 Cap ID 1 Version 0.5 26 August 2004 Page 18 of 31 For use with Vega 50 FXS – H.323 version 04.01.05.1 T017 or greater. © 2002-2004 VegaStream Ltd.
  • Page 19 “here” to return Modify all H245 Cap ID entries until the list looks as follows: Version 0.5 26 August 2004 Page 19 of 31 For use with Vega 50 FXS – H.323 version 04.01.05.1 T017 or greater. © 2002-2004 VegaStream Ltd.
  • Page 20 Adjust them so that they have the capabilities as indicated below: Scroll to the bottom of the Media Channels page Version 0.5 26 August 2004 Page 20 of 31 For use with Vega 50 FXS – H.323 version 04.01.05.1 T017 or greater. © 2002-2004 VegaStream Ltd.
  • Page 21 T.38 codec is offered (as configured here), because if both are offered negotiations do not always complete correctly. Version 0.5 26 August 2004 Page 21 of 31 For use with Vega 50 FXS – H.323 version 04.01.05.1 T017 or greater. © 2002-2004 VegaStream Ltd.
  • Page 22 On the left hand side menu select POTS Scroll to the bottom of the page Version 0.5 26 August 2004 Page 22 of 31 For use with Vega 50 FXS – H.323 version 04.01.05.1 T017 or greater. © 2002-2004 VegaStream Ltd.
  • Page 23 Now configure the per port information In the QSLAC Codec Configuration section Select for QSL ID 1 Version 0.5 26 August 2004 Page 23 of 31 For use with Vega 50 FXS – H.323 version 04.01.05.1 T017 or greater. © 2002-2004 VegaStream Ltd.
  • Page 24 “here” to return In the QSLAC Codec Configuration section again select in QSL ID 1. Version 0.5 26 August 2004 Page 24 of 31 For use with Vega 50 FXS – H.323 version 04.01.05.1 T017 or greater. © 2002-2004 VegaStream Ltd.
  • Page 25 In the Groups in this QSL section again select in Group ID 1. Version 0.5 26 August 2004 Page 25 of 31 For use with Vega 50 FXS – H.323 version 04.01.05.1 T017 or greater. © 2002-2004 VegaStream Ltd.
  • Page 26 , DN = 1344784412 QSLID 8 Group 1 NT = , DN = 1344784413 Version 0.5 26 August 2004 Page 26 of 31 For use with Vega 50 FXS – H.323 version 04.01.05.1 T017 or greater. © 2002-2004 VegaStream Ltd.
  • Page 27 On the left hand side menu select Scroll to the bottom of the screen Select Advanced LAN Version 0.5 26 August 2004 Page 27 of 31 For use with Vega 50 FXS – H.323 version 04.01.05.1 T017 or greater. © 2002-2004 VegaStream Ltd.
  • Page 28 (Substitute appropriate drive letter if D: is not the CD-ROM) select and then click “here” to return Version 0.5 26 August 2004 Page 28 of 31 For use with Vega 50 FXS – H.323 version 04.01.05.1 T017 or greater. © 2002-2004 VegaStream Ltd.
  • Page 29: Save Changes

    The Vega will reboot and once back on-line, it will be ready to take its first call. Version 0.5 26 August 2004 Page 29 of 31 For use with Vega 50 FXS – H.323 version 04.01.05.1 T017 or greater. © 2002-2004 VegaStream Ltd.
  • Page 30 If the ftp server requires a login username and password configure the following: set _advanced.lan.ftp.anonymous_login=0 set _advanced.lan.ftp.username=<ftp username> set _advanced.lan.ftp._password-<ftp password> Version 0.5 26 August 2004 Page 30 of 31 For use with Vega 50 FXS – H.323 version 04.01.05.1 T017 or greater. © 2002-2004 VegaStream Ltd.
  • Page 31 12. Technical Support Support information can be found on the VegaStream Support web site www.VegaAssist.com If you require help from VegaStream support personnel, please use the serial interface or telnet into the unit, log in and then type: show support...

This manual is also suitable for:

Vega 50 fxs