VegaStream Vega 50 8 FXS + 2 FXO Initial Configuration Manual

This document describes how to configure the Vega 50 8 FXS + 2 FXO H.323 gateway unit using
the web browser interface. The configuration described here will allow the Vega to be rapidly
installed and tested.
The instructions below will configure the Vega 50 8 FXS + 2 FXO to operate as follows:
•
Each of the 8 FXS ports (connected to analogue telephones) will be configured with a
3-digit extension number 406 to 413. Calls made by any of the attached analogue phones
will be routed using the H.323 gatekeeper; the telephone number presented to the
gatekeeper will be the digits dialled on the phone
•
Calls received from the PBX (on the FXO ports) will be routed using the H.323 gatekeeper;
the DN (directory number) for the port on which the call was received will be passed as the
dialled digits
•
Calls received on the H.323 interface with a leading 9 in the dialled number will be routed
out of the first FXO port
06 06 07 07
406 406 406 407 407 407
POTS Telephones POTS Telephones
Version 0.5
For use with Vega 50 8 FXS + 2 FXO – H.323 version 09.01.05.2 T003 or greater.
gk gk gk
H.323 Gatekeeper H.323 Gatekeeper
Vega 50 Vega 50
05 05
8 FXS + 2 FXO 8 FXS + 2 FXO
13 13 56 57 56 57
... ... ...
413 413 413
29 November 2004
Initial configuration
Vega 50
(H.323)
– R5.2
LAN LAN
pstn pstn pstn
8 FXS + 2 FXO
pstn pstn
© 2004 VegaStream Ltd.
Page 1 of 35