Download
Share
Print this page
  1. Manuals
  2. Brands
  3. VegaStream Manuals
  4. Network Router
  5. Vega 50 FXS
  6. Manual

VegaStream Vega 50 FXS Manual

Hide thumbs Also See for Vega 50 FXS:

Advertisement

Quick Links

Download this manual
This document describes how to configure the Vega 50 FXS SIP unit using the web browser
interface. The configuration described here will allow the Vega to be rapidly installed and tested.
The instructions below will configure the Vega 50 FXS to operate as follows:
•
Calls made by any of the attached analogue phones will be routed to the SIP proxy; the
Vega will pass on any dialled digits
•
Calls received from the SIP proxy must have a 2-digit "dialled number", 06 to 13, to
identify which of the 8 telephones to ring. (The translation of the telephone number to the
2-digit dialled number is carried out in the SIP proxy as the Vega registers the 2-digit
dialled numbers against the user access numbers (registered addresses).)
55501
Unit1Port1Vega50
Unit1Port2Vega50
Contact:
06
Version 0.1
For use with Vega 50 FXS – SIP version 04.02.07 T014 or greater.
Initial configuration
Vega 50 FXS (SIP)
SIP Proxy
Vega 50 FXS
...
POTS Telephones
55502
55508
Unit1Port8Vega50
Contact:
07
Contact:
23 September 2005
LAN
13
– R7.0
Page 1 of 41
© 2002-2005 VegaStream Ltd.

Advertisement

loading

Related Manuals for VegaStream Vega 50 FXS

Summary of Contents for VegaStream Vega 50 FXS

  • Page 1 Vega 50 FXS (SIP) – R7.0 This document describes how to configure the Vega 50 FXS SIP unit using the web browser interface. The configuration described here will allow the Vega to be rapidly installed and tested. The instructions below will configure the Vega 50 FXS to operate as follows: •...
  • Page 2 Configure Registration Configure POTS parameters Save Changes Archive Vega Configuration Please also see: Technical Support Version 0.1 23 September 2005 Page 2 of 41 For use with Vega 50 FXS – SIP version 04.02.07 T014 or greater. © 2002-2005 VegaStream Ltd.
  • Page 3 The LAN LEDs will also illuminate indicating 10 (baseT) or 100 (baseTx) connection, and the FDX LED will illuminate if Full Duplex mode has been negotiated. Version 0.1 23 September 2005 Page 3 of 41 For use with Vega 50 FXS – SIP version 04.02.07 T014 or greater. © 2002-2005 VegaStream Ltd.
  • Page 4 If this is not the IP address required, it can be overridden, together with other LAN parameters by typing: set lan.use_dhcp=0 set lan.ip=aaa.bbb.ccc.ddd set lan.subnet=eee.fff.ggg.hhh set lan.gateway=iii.jjj.kkk.lll save reboot system Version 0.1 23 September 2005 Page 4 of 41 For use with Vega 50 FXS – SIP version 04.02.07 T014 or greater. © 2002-2005 VegaStream Ltd.
  • Page 5 You will then be presented with the login page: Enter the default Username and Password Username: admin Password: admin Select Version 0.1 23 September 2005 Page 5 of 41 For use with Vega 50 FXS – SIP version 04.02.07 T014 or greater. © 2002-2005 VegaStream Ltd.
  • Page 6 On the left hand side menu select Users Version 0.1 23 September 2005 Page 6 of 41 For use with Vega 50 FXS – SIP version 04.02.07 T014 or greater. © 2002-2005 VegaStream Ltd.
  • Page 7 Version 0.1 23 September 2005 Page 7 of 41 For use with Vega 50 FXS – SIP version 04.02.07 T014 or greater. © 2002-2005 VegaStream Ltd.
  • Page 8 Optional: If there are any LAN values that need to be set up manually set them up now (e.g. tftp and ftp addresses), then select and then click “here” to return Version 0.1 23 September 2005 Page 8 of 41 For use with Vega 50 FXS – SIP version 04.02.07 T014 or greater. © 2002-2005 VegaStream Ltd.
  • Page 9 On the left hand side menu select Dial Plan Firstly, turn off the default profile: In the Profiles section Select Version 0.1 23 September 2005 Page 9 of 41 For use with Vega 50 FXS – SIP version 04.02.07 T014 or greater. © 2002-2005 VegaStream Ltd.
  • Page 10 In the Profiles section, on Profile ID 2 (the new profile): Select Set Name = Outbound_To_LAN select and then click “here” to return Version 0.1 23 September 2005 Page 10 of 41 For use with Vega 50 FXS – SIP version 04.02.07 T014 or greater. © 2002-2005 VegaStream Ltd.
  • Page 11 In the Profiles section, on Profile ID 2: Select In the Plans in this Profile, Plan ID 1: Select Version 0.1 23 September 2005 Page 11 of 41 For use with Vega 50 FXS – SIP version 04.02.07 T014 or greater. © 2002-2005 VegaStream Ltd.
  • Page 12 In a similar manner to adding profile 2 add another profile, profile 3, Set Name = Inbound_from_LAN Version 0.1 23 September 2005 Page 12 of 41 For use with Vega 50 FXS – SIP version 04.02.07 T014 or greater. © 2002-2005 VegaStream Ltd.
  • Page 13 “The Dial Planner” in the Vega Primer. Version 0.1 23 September 2005 Page 13 of 41 For use with Vega 50 FXS – SIP version 04.02.07 T014 or greater. © 2002-2005 VegaStream Ltd.
  • Page 14 If only the proxy is allowed to route the calls to the Vega ensure that this tick box is clear. select and then click “here” to return Version 0.1 23 September 2005 Page 14 of 41 For use with Vega 50 FXS – SIP version 04.02.07 T014 or greater. © 2002-2005 VegaStream Ltd.
  • Page 15 “here” to return Version 0.1 23 September 2005 Page 15 of 41 For use with Vega 50 FXS – SIP version 04.02.07 T014 or greater. © 2002-2005 VegaStream Ltd.

  • Page 16: Configure Authentication

    On the left hand side menu select Scroll down to the bottom of the page Version 0.1 23 September 2005 Page 16 of 41 For use with Vega 50 FXS – SIP version 04.02.07 T014 or greater. © 2002-2005 VegaStream Ltd.
  • Page 17 Select Advanced SIP Version 0.1 23 September 2005 Page 17 of 41 For use with Vega 50 FXS – SIP version 04.02.07 T014 or greater. © 2002-2005 VegaStream Ltd.
  • Page 18 “here” to return On the left hand side menu select POTS Version 0.1 23 September 2005 Page 18 of 41 For use with Vega 50 FXS – SIP version 04.02.07 T014 or greater. © 2002-2005 VegaStream Ltd.
  • Page 19 Select POTS_Interface_Profiles Select Version 0.1 23 September 2005 Page 19 of 41 For use with Vega 50 FXS – SIP version 04.02.07 T014 or greater. © 2002-2005 VegaStream Ltd.
  • Page 20 “here” to return select … to return to the POTS configuration page Version 0.1 23 September 2005 Page 20 of 41 For use with Vega 50 FXS – SIP version 04.02.07 T014 or greater. © 2002-2005 VegaStream Ltd.
  • Page 21 The Authentication usernumber and password are configured on a per port basis. In the Port Configuration section, for Port ID 1 Select Version 0.1 23 September 2005 Page 21 of 41 For use with Vega 50 FXS – SIP version 04.02.07 T014 or greater. © 2002-2005 VegaStream Ltd.
  • Page 22 In the Interface Configuration section, for Port Index 1 Select Version 0.1 23 September 2005 Page 22 of 41 For use with Vega 50 FXS – SIP version 04.02.07 T014 or greater. © 2002-2005 VegaStream Ltd.
  • Page 23 Configure Authentication usernumber and Password select and then click “here” to return Version 0.1 23 September 2005 Page 23 of 41 For use with Vega 50 FXS – SIP version 04.02.07 T014 or greater. © 2002-2005 VegaStream Ltd.
  • Page 24 Repeat configuring the Authentication usernumber and Password for all other Ports Version 0.1 23 September 2005 Page 24 of 41 For use with Vega 50 FXS – SIP version 04.02.07 T014 or greater. © 2002-2005 VegaStream Ltd.
  • Page 25 … set up by DHCP or in section 4 Host_Name_or_IP_address_of_Vega Name Registration message format: --- address: Username_prefixUsernameUsername_suffix@Registration_Domain --- contact: <sip:DN@Host_Name_or_IP_address_of_Vega> Version 0.1 23 September 2005 Page 25 of 41 For use with Vega 50 FXS – SIP version 04.02.07 T014 or greater. © 2002-2005 VegaStream Ltd.
  • Page 26 <sip:13@Host_Name_or_IP_address_of_Vega> On the left hand side menu select Scroll down to the Registration section Version 0.1 23 September 2005 Page 26 of 41 For use with Vega 50 FXS – SIP version 04.02.07 T014 or greater. © 2002-2005 VegaStream Ltd.
  • Page 27 “here” to return Return to the Registration section. For SIP Registrar 1: Select Version 0.1 23 September 2005 Page 27 of 41 For use with Vega 50 FXS – SIP version 04.02.07 T014 or greater. © 2002-2005 VegaStream Ltd.
  • Page 28 Set IP/DNS Name = IP_or_DNS_name_of_SIP_registrar_or_machine proxying_for_the_registrar select and then click “here” to return Version 0.1 23 September 2005 Page 28 of 41 For use with Vega 50 FXS – SIP version 04.02.07 T014 or greater. © 2002-2005 VegaStream Ltd.
  • Page 29 On the left hand side menu select POTS Select POTS_Interface_Profiles Select Version 0.1 23 September 2005 Page 29 of 41 For use with Vega 50 FXS – SIP version 04.02.07 T014 or greater. © 2002-2005 VegaStream Ltd.
  • Page 30 “here” to return select … to return to the POTS configuration page Version 0.1 23 September 2005 Page 30 of 41 For use with Vega 50 FXS – SIP version 04.02.07 T014 or greater. © 2002-2005 VegaStream Ltd.
  • Page 31 The username, usernumber and Contact DN are configured on a per port basis. In the Port Configuration section, for Port ID 1 Select Version 0.1 23 September 2005 Page 31 of 41 For use with Vega 50 FXS – SIP version 04.02.07 T014 or greater. © 2002-2005 VegaStream Ltd.
  • Page 32 In the Interface Configuration section, for Port Index 1 Select Version 0.1 23 September 2005 Page 32 of 41 For use with Vega 50 FXS – SIP version 04.02.07 T014 or greater. © 2002-2005 VegaStream Ltd.
  • Page 33 Usernumber = 01 select and then click “here” to return Return to this page Version 0.1 23 September 2005 Page 33 of 41 For use with Vega 50 FXS – SIP version 04.02.07 T014 or greater. © 2002-2005 VegaStream Ltd.
  • Page 34 Username = Port8 check Usernumber = 08 check that Enable registration is set to 1 Version 0.1 23 September 2005 Page 34 of 41 For use with Vega 50 FXS – SIP version 04.02.07 T014 or greater. © 2002-2005 VegaStream Ltd.
  • Page 35 URL, causing the Vega to be called at the appropriate contact address (DN@Host_Name_or_IP_address of_Vega). Version 0.1 23 September 2005 Page 35 of 41 For use with Vega 50 FXS – SIP version 04.02.07 T014 or greater. © 2002-2005 VegaStream Ltd.
  • Page 36 9. Configure POTS parameters On the left hand side menu select POTS Select POTS_Interface_Profiles Select Version 0.1 23 September 2005 Page 36 of 41 For use with Vega 50 FXS – SIP version 04.02.07 T014 or greater. © 2002-2005 VegaStream Ltd.
  • Page 37 Optional: Change the DTMF Termination character from * to # select and then click “here” to return Version 0.1 23 September 2005 Page 37 of 41 For use with Vega 50 FXS – SIP version 04.02.07 T014 or greater. © 2002-2005 VegaStream Ltd.

  • Page 38: Save Changes

    The Vega will reboot and once back on-line, it will be ready to take its first call. Version 0.1 23 September 2005 Page 38 of 41 For use with Vega 50 FXS – SIP version 04.02.07 T014 or greater. © 2002-2005 VegaStream Ltd.
  • Page 39 If the ftp server requires a login username and password configure the following: set _advanced.lan.ftp.anonymous_login=0 set _advanced.lan.ftp.username=<ftp username> set _advanced.lan.ftp._password-<ftp password> Version 0.1 23 September 2005 Page 39 of 41 For use with Vega 50 FXS – SIP version 04.02.07 T014 or greater. © 2002-2005 VegaStream Ltd.

  • Page 40: Technical Support

    12. Technical Support Support information can be found on the VegaStream Support web site www.VegaAssist.com If you require help from VegaStream support personnel, please use the serial interface or telnet into the unit, log in and then type: show support...
  • Page 41 Bracknell CA 92121 Berks RG12 1RW +44 (0) 1344 784900 +1 858 824 6388 Version 0.1 23 September 2005 Page 41 of 41 For use with Vega 50 FXS – SIP version 04.02.07 T014 or greater. © 2002-2005 VegaStream Ltd.

This manual is also suitable for:

Vega 50 fxs sip