Download Print this page

VegaStream Vega 100 E1 Manual

Initial configuration

Advertisement

Quick Links

This document describes how to configure the Vega 100 E1 SIP unit using the web browser
interface. The configuration described will allow the Vega to be rapidly installed and tested.
The instructions below will configure the Vega 100 to be a transparent gateway for a SIP Proxy.
Calls made from the PBX or PSTN to the Vega will be forwarded to the SIP Proxy. The
dialled number passed to the Vega will be forwarded unchanged to the SIP Proxy.
Calls made from the SIP Proxy to the Vega will be forwarded to the PSTN or to the PBX
based on the leading two digits of the telephone number passed by the proxy. A leading
01 will cause the call to be routed to the PSTN, and a leading 02 will cause the call to be
routed to the PBX. The digits following the 01 or 02 will be passed as the dialled digits.
Vega 100
Version 0.6
For use with Vega 100 E1 – SIP version 08.02.06 T007 or greater.
Initial configuration
Vega 100 E1 (SIP)
SIP Proxy
LAN
29 November 2004
pstn / isdn
© 2002-2004 VegaStream Ltd.
– R6
IP Phone
Page 1 of 42

Advertisement

loading
Need help?

Need help?

Do you have a question about the Vega 100 E1 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for VegaStream Vega 100 E1

  • Page 1 Vega 100 E1 (SIP) – R6 This document describes how to configure the Vega 100 E1 SIP unit using the web browser interface. The configuration described will allow the Vega to be rapidly installed and tested. The instructions below will configure the Vega 100 to be a transparent gateway for a SIP Proxy.
  • Page 2 Configure pointer to CD ROM documentation Save Changes Archive Vega Configuration Please also see: Technical Support Advanced configuration Version 0.6 29 November 2004 Page 2 of 42 For use with Vega 100 E1 – SIP version 08.02.06 T007 or greater. © 2002-2004 VegaStream Ltd.
  • Page 3 The LAN LEDs will also illuminate indicating 10 (baseT) or 100 (base TX) connection, and the FDX LED will illuminate if Full Duplex mode has been negotiated. Version 0.6 29 November 2004 Page 3 of 42 For use with Vega 100 E1 – SIP version 08.02.06 T007 or greater. © 2002-2004 VegaStream Ltd.
  • Page 4 If this is not the IP address required, it can be overridden, together with other LAN parameters by typing: set lan.use_dhcp=0 set lan.ip=aaa.bbb.ccc.ddd set lan.subnet=eee.fff.ggg.hhh set lan.gateway=iii.jjj.kkk.lll save reboot system Version 0.6 29 November 2004 Page 4 of 42 For use with Vega 100 E1 – SIP version 08.02.06 T007 or greater. © 2002-2004 VegaStream Ltd.
  • Page 5 Enter the IP address of the Vega into the “Address” field of your web browser. You will then be presented with the login page: Version 0.6 29 November 2004 Page 5 of 42 For use with Vega 100 E1 – SIP version 08.02.06 T007 or greater. © 2002-2004 VegaStream Ltd.
  • Page 6 Enter the default Username and Password Username: admin Password: admin Select On the left hand side menu select Users Version 0.6 29 November 2004 Page 6 of 42 For use with Vega 100 E1 – SIP version 08.02.06 T007 or greater. © 2002-2004 VegaStream Ltd.
  • Page 7 Version 0.6 29 November 2004 Page 7 of 42 For use with Vega 100 E1 – SIP version 08.02.06 T007 or greater. © 2002-2004 VegaStream Ltd.
  • Page 8 Optional: If there are any LAN values that need to be set up manually, set them up now (e.g. tftp and ftp addresses), then Select and then click “here” to return Version 0.6 29 November 2004 Page 8 of 42 For use with Vega 100 E1 – SIP version 08.02.06 T007 or greater. © 2002-2004 VegaStream Ltd.
  • Page 9 Firstly, turn off the default profile: In the Profiles section, Profile ID 1 Select Version 0.6 29 November 2004 Page 9 of 42 For use with Vega 100 E1 – SIP version 08.02.06 T007 or greater. © 2002-2004 VegaStream Ltd.
  • Page 10 In the Profiles section, on Profile 2 (the new profile): Select Set Name = ISDN_To_LAN select and then click “here” to return Version 0.6 29 November 2004 Page 10 of 42 For use with Vega 100 E1 – SIP version 08.02.06 T007 or greater. © 2002-2004 VegaStream Ltd.
  • Page 11 In the Profiles section, on Profile 2 (the ISDN_To_LAN profile): Select In the Plans in this Profile section: Select Version 0.6 29 November 2004 Page 11 of 42 For use with Vega 100 E1 – SIP version 08.02.06 T007 or greater. © 2002-2004 VegaStream Ltd.
  • Page 12 “here” to return Version 0.6 29 November 2004 Page 12 of 42 For use with Vega 100 E1 – SIP version 08.02.06 T007 or greater. © 2002-2004 VegaStream Ltd.
  • Page 13 On the left hand side menu select Dial Plan Version 0.6 29 November 2004 Page 13 of 42 For use with Vega 100 E1 – SIP version 08.02.06 T007 or greater. © 2002-2004 VegaStream Ltd.
  • Page 14 – 01 or 02 – and the remainder of the digits are passed on as the telephone number) Version 0.6 29 November 2004 Page 14 of 42 For use with Vega 100 E1 – SIP version 08.02.06 T007 or greater. © 2002-2004 VegaStream Ltd.
  • Page 15 “The Dial Planner” in the Vega Primer. Version 0.6 29 November 2004 Page 15 of 42 For use with Vega 100 E1 – SIP version 08.02.06 T007 or greater. © 2002-2004 VegaStream Ltd.
  • Page 16 If only the proxy is allowed to route the calls to the Vega ensure that this tick box is clear. Version 0.6 29 November 2004 Page 16 of 42 For use with Vega 100 E1 – SIP version 08.02.06 T007 or greater. © 2002-2004 VegaStream Ltd.
  • Page 17 “here” to return Version 0.6 29 November 2004 Page 17 of 42 For use with Vega 100 E1 – SIP version 08.02.06 T007 or greater. © 2002-2004 VegaStream Ltd.
  • Page 18: Configure Authentication

    On the left hand side menu select Scroll down to the bottom to the SIP Authentication Configuration section Select SIP_Authentication Version 0.6 29 November 2004 Page 18 of 42 For use with Vega 100 E1 – SIP version 08.02.06 T007 or greater. © 2002-2004 VegaStream Ltd.
  • Page 19 Select Version 0.6 29 November 2004 Page 19 of 42 For use with Vega 100 E1 – SIP version 08.02.06 T007 or greater. © 2002-2004 VegaStream Ltd.
  • Page 20 On the left hand side menu select Scroll down to the bottom to the Advanced SIP Configuration section Version 0.6 29 November 2004 Page 20 of 42 For use with Vega 100 E1 – SIP version 08.02.06 T007 or greater. © 2002-2004 VegaStream Ltd.
  • Page 21 Select Advanced_SIP Version 0.6 29 November 2004 Page 21 of 42 For use with Vega 100 E1 – SIP version 08.02.06 T007 or greater. © 2002-2004 VegaStream Ltd.
  • Page 22 Tick Use Authentication Users Version 0.6 29 November 2004 Page 22 of 42 For use with Vega 100 E1 – SIP version 08.02.06 T007 or greater. © 2002-2004 VegaStream Ltd.
  • Page 23 In some circumstances the SIP proxy does demand that the Vega registers with it. If registration is required, see 14.1 “ Configure Vega 100 registration ” Version 0.6 29 November 2004 Page 23 of 42 For use with Vega 100 E1 – SIP version 08.02.06 T007 or greater. © 2002-2004 VegaStream Ltd.
  • Page 24 If required QSIG is also an acceptable Network Type for E1 Vega 100s. In the DSL Configuration section check that the Network Topology = E1 Version 0.6 29 November 2004 Page 24 of 42 For use with Vega 100 E1 – SIP version 08.02.06 T007 or greater. © 2002-2004 VegaStream Ltd.
  • Page 25 Note, ESF and SF are not supported on the E1 interface select and then click “here” to return Version 0.6 29 November 2004 Page 25 of 42 For use with Vega 100 E1 – SIP version 08.02.06 T007 or greater. © 2002-2004 VegaStream Ltd.
  • Page 26 These are the default settings of the Vega and so no changes are required to the Network Terminator, Clock_Master, or Bus_Master settings. Version 0.6 29 November 2004 Page 26 of 42 For use with Vega 100 E1 – SIP version 08.02.06 T007 or greater. © 2002-2004 VegaStream Ltd.
  • Page 27 Return to this page: Set DTMF Dial Timeout = 5 select and then click “here” to return Version 0.6 29 November 2004 Page 27 of 42 For use with Vega 100 E1 – SIP version 08.02.06 T007 or greater. © 2002-2004 VegaStream Ltd.
  • Page 28 In the Groups section, check that Last Channel = auto or 30, if not change it to auto or 30. If changes are made select and then click “here” to return select Version 0.6 29 November 2004 Page 28 of 42 For use with Vega 100 E1 – SIP version 08.02.06 T007 or greater. © 2002-2004 VegaStream Ltd.
  • Page 29 Repeat for the other Port (PORT ID 2). Table 1 can be used as a guide when setting up parameters for Vega 100 E1 ISDN installations. Table 1. Network type, Line Encoding, and Topology Product Physical Network Networ DSLs Framing...
  • Page 30 Scroll to the bottom of the screen Select Advanced LAN Scroll to the bottom of the screen Version 0.6 29 November 2004 Page 30 of 42 For use with Vega 100 E1 – SIP version 08.02.06 T007 or greater. © 2002-2004 VegaStream Ltd.
  • Page 31 (Substitute the appropriate drive letter if D: is not the CD-ROM) select and then click “here” to return Version 0.6 29 November 2004 Page 31 of 42 For use with Vega 100 E1 – SIP version 08.02.06 T007 or greater. © 2002-2004 VegaStream Ltd.
  • Page 32: Save Changes

    The Vega will reboot and once back on-line, it will be ready to take its first call. Version 0.6 29 November 2004 Page 32 of 42 For use with Vega 100 E1 – SIP version 08.02.06 T007 or greater. © 2002-2004 VegaStream Ltd.
  • Page 33 If the ftp server requires a login username and password configure the following: set _advanced.lan.ftp.anonymous_login=0 set _advanced.lan.ftp.username=<ftp username> set _advanced.lan.ftp._password-<ftp password> Version 0.6 29 November 2004 Page 33 of 42 For use with Vega 100 E1 – SIP version 08.02.06 T007 or greater. © 2002-2004 VegaStream Ltd.
  • Page 34: Technical Support

    13. Technical Support Support information can be found on the VegaStream Support web site www.VegaAssist.com If you require help from VegaStream support personnel, please use the serial interface or telnet into the unit, log in and then type: show support...
  • Page 35: Advanced Configuration

    For example, to register with a username “Vega100Gateway123” On the left hand side menu select Scroll down to the Registration section Version 0.6 29 November 2004 Page 35 of 42 For use with Vega 100 E1 – SIP version 08.02.06 T007 or greater. © 2002-2004 VegaStream Ltd.
  • Page 36 “here” to return In the SIP Registration Users Configuration section Select SIP Registration Users Version 0.6 29 November 2004 Page 36 of 42 For use with Vega 100 E1 – SIP version 08.02.06 T007 or greater. © 2002-2004 VegaStream Ltd.
  • Page 37 In Modify SIP Registration User, SIP Registration User 1 Tick Enable Set Username Suffix = none Set Username = Vega100Gateway123 Version 0.6 29 November 2004 Page 37 of 42 For use with Vega 100 E1 – SIP version 08.02.06 T007 or greater. © 2002-2004 VegaStream Ltd.
  • Page 38 Long haul should be selected when the cable between the Vega and the closest repeater or other ISDN endpoint introduces more that 6dB attenuation. Version 0.6 29 November 2004 Page 38 of 42 For use with Vega 100 E1 – SIP version 08.02.06 T007 or greater. © 2002-2004 VegaStream Ltd.
  • Page 39 Then select the PORT ID to alter, select Scroll to the bottom of the page Version 0.6 29 November 2004 Page 39 of 42 For use with Vega 100 E1 – SIP version 08.02.06 T007 or greater. © 2002-2004 VegaStream Ltd.
  • Page 40 In the Groups section: Select Version 0.6 29 November 2004 Page 40 of 42 For use with Vega 100 E1 – SIP version 08.02.06 T007 or greater. © 2002-2004 VegaStream Ltd.
  • Page 41 2. Typically wait_for_connect and user_progress configuration parameters should either both set to 1 or both set to 0. Version 0.6 29 November 2004 Page 41 of 42 For use with Vega 100 E1 – SIP version 08.02.06 T007 or greater. © 2002-2004 VegaStream Ltd.
  • Page 42 Bracknell CA 92121 Berks RG12 1RE +44 (0) 1344 784900 +1 858 824 6388 Version 0.6 29 November 2004 Page 42 of 42 For use with Vega 100 E1 – SIP version 08.02.06 T007 or greater. © 2002-2004 VegaStream Ltd.