To Arc/Earc Tv - Onkyo TX-RZ840 Instruction Manual

To ARC/eARC TV

a
IN(ARC)
a HDMI cable
Contents Connections
≫
If the TV supports the ARC (Audio Return Channel) function (*), use only the
HDMI cable to connect with the TV. Use the ARC-compatible HDMI IN jack of the
TV for connection. You connect the HDMI cable to the port labeled OUT on the
receiver side.
• Another TV or projector can be connected to the HDMI OUT SUB jack. Switch
between MAIN and SUB using the HDMI MAIN/SUB button on the remote
controller (
ARC-compatible.
• If devices with different resolutions are connected to HDMI OUT MAIN jack
and SUB jack, images are output with the lower resolution.
• If a 4K high-quality video is played, use a Premium High Speed HDMI Cable
or Premium High Speed HDMI Cable with Ethernet whose package has a
"PREMIUM Certified Cable" label.
Setup
• Settings are required to use the ARC function. Select "Yes" for "4. ARC Setup"
in Initial Setup (
Setup menu after Initial Setup is completed. Press
and set "5. Hardware" - "HDMI" - "Audio Return Channel (eARC supported)"
to "On". (
• For detailed settings for TV connection, CEC function and audio output, refer
to the instruction manual of the TV.
(*) ARC function: Transmits the audio signals of the TV via an HDMI cable, and
plays the audio of the TV on this unit. Connection to an ARC-compatible TV is
complete with one HDMI cable. To check if the TV supports the ARC function,
TV
refer to the instruction manual of the TV, etc.
71
Playback
≫
p16) or "Quick Menu" ( p177). Note that this jack is not
p180). If "No, Skip" is selected, settings are required in the
p168)
Front Panel≫ Rear Panel≫ Remote≫
Setup
≫ ≫
on the remote controller,