Onkyo TX-RZ840 Instruction Manual page 167

Setting Item Default Value
PCM Fixed Mode Off
• The setting cannot be changed when "TUNER", "NET", or "BLUETOOTH" input is
selected.
„ Video Select
When "TUNER", "NET", or "BLUETOOTH" input is selected, you can set the input
from which video is displayed on the TV.
Setting Item Default Value
Video Select Last
• If the OSD language is set to Chinese, you can select this setting only when "TUNER" is
selected as input. (European, Australian and Asian models)
Setting Details
Select whether to fix input signals to PCM (except
multi-channel PCM) when you select "HDMI",
"COAXIAL", or "OPTICAL" in the "Audio Select"
setting. Set this item to "On" if noise is produced or
truncation occurs at the beginning of a track when
playing PCM sources. Select "Off" normally.
• Each time the "Audio Select" setting is changed,
the setting is restored to "Off".
Setting Details
"Last": Select the video input played last
"BD/DVD", "GAME", "CBL/SAT", "STRM BOX",
"PC", "AUX", "CD", "TV", "PHONO": Play the video
of each input.
• This setting is effective for an input selector
assigned in "1. Input/Output Assign" - "HDMI
Input".
Contents Connections
≫
5. Hardware
„ 1. HDMI
Change the settings of the HDMI function.
Setting Item Default Value
HDMI CEC Off
167
Front Panel≫ Rear Panel≫ Remote≫
Playback Setup
≫ ≫
Setting Details
Setting this to "On" enables the input selection link
and other link functions with HDMI-connected CEC-
compatible device.
"On": When this function is used
"Off": When this function is not used
When this setting is changed, turn off and then on
again the power of all connected devices.
• Depending on the TV to use, a link setting may
be required on the TV.
• This function is effective only when the device is
connected to the HDMI OUT MAIN terminal.
• Setting this to "On" and closing the operation
screen will display the name of the connected
CEC-compatible device and "CEC On" on the
main unit's display.
• When this function is set to "On", the power
consumption in standby state increases,
however, the increase in power consumption is
minimized by automatically entering the HYBRID
STANDBY mode where only the essential circuits
operate.
• If you operate the MASTER VOLUME dial on the
main unit when this setting is "On" and audio is
output from the TV speakers, audio will be output
also from the speakers connected to this unit. To
output audio from only either of them, change the
setting of this unit or TV, or reduce the volume of
this unit.
• If abnormal behavior is observed when this is set
to "On", set it to "Off".
• If a connected device is not CEC-compatible, or
if you are not sure whether it is compatible, set
it to "Off".
≫