the port concerned can only be connected to exactly another bridge (i.e. it is served
by a point-to-point LAN segment), or can be connected to two or more bridges (i.e. it
is served by a shared medium LAN segment). This function allows the P2P status of
the link to be manipulated administratively. True means the port is regarded as a
point-to-point link. False means the port is regarded as a shared link. Auto means
the link type is determined by the auto-negotiation between the two peers.
Edge: The port directly connected to end stations won't create bridging loop in the
network. To configure the port as an edge port, set the port to "True" status.
Click
.
Apply
46