Safety Guidelines - Definitions; Power Supply; Cutting Capacity - Porter-Cable PC14CTSW Instruction Manual

90547095 PC14CTSW 6/24/09

SAFETY GUIDELINES - DEFINITIONS

It is important for you to read and understand this manual. The information it contains
relates to protecting YOUR SAFETY and PREVENTING PROBLEMS. The symbols
below are used to help you recognize this information.
:
Indicates an imminently hazardous situation which, if not avoided, will
result in death or serious injury.
:
Indicates a potentially hazardous situation which, if not avoided, could
result in death or serious injury.
:
Indicates a potentially hazardous situation which, if not avoided, may
result in minor or moderate injury.
:
Used without the safety alert symbol indicates a potentially hazardous
situation which, if not avoided, may result in property damage.
FEATURES (FIG. 1, 4)
A. Lock Chain
B. Spark deflector screw
C. Spark deflector
D. Base
E. Fence
F. Vise
G. Flat Wrench
H. Crank
I. Vise Lever
J. Wheel
K. Guard
L. Spindle Lock
M. Depth Stop Bolt and Jam Nut
N. Trigger Switch
O. Padlock Hole
P. Fence Bolts

POWER SUPPLY

Be sure your power supply agrees with the nameplate marking. A voltage decrease of
more than 10% will cause a loss of power and overheating.

CUTTING CAPACITY

The wide vise opening and high pivot point provide cutting capacity for many large pieces.
Use the cutting capacity chart to determine total maximum size of cuts that can be made
with a new wheel.
:
CERTAIN LARGE, CIRCULAR OR IRREGULARLY SHAPED
OBJECTS MAY REQUIRE ADDITIONAL HOLDING MEANS IF THEY CANNOT BE
HELD SECURELY IN VISE.
:
DO NOT CUT MAGNESIUM WITH THIS TOOL.
10:06 AM Page 5
5