Sony Bravia KDL-40X3000 Operating Instructions Manual page 38

AV2 Output
HDMI Set-up
Auto Start-up
Power Saving
Light Sensor
Logo Illumination
PC Power Management
38
GB
Sets a signal to be output through the socket labelled
If you connect a VCR or other recording equipment to the
then record from the equipment connected to other sockets of the TV.
"TV": Outputs a broadcast.
"AV1": Outputs signals from equipment connected to the
"AV7": Outputs signals from equipment connected to the
"Auto": Outputs whatever is being viewed on the screen (except signals from the
/ 3, / 4, HDMI IN 5, HDMI IN 6, HDMI IN 8 and PC IN
sockets).
This is used to set the HDMI control compatible equipment connected to the HDMI
sockets. Note that the link setting must also be made on the side of the HDMI control
compatible equipment that is connected.
HDMI Control
Sets whether or not to link the operations of the HDMI control compatible equipment
and the TV. When set to "On", the following menu items can be performed.
Auto Devices Off
When this is set to "On", any connected HDMI control compatible equipment will
be turned off with the TV.
Auto TV On
When this is set to "On", and if the connected HDMI control compatible equipment
is turned on, the TV automatically turns on, and then displays the HDMI input from
the connected equipment.
HDMI Device List
Displays the connected HDMI control compatible equipment.
~
You cannot use "HDMI Control" if the TV operations are linked to the operations of an audio
system that is compatible with HDMI control.
Starts the initial set-up to select the language and country/region, and tune in all
available digital and analogue channels.
Usually, you do not need to do this operation because the language and country/
region will have been selected and channels already tuned when the TV was first
installed (page 6).
However, this option allows you to repeat the process (e.g. to retune the TV after
moving house, or to search for new channels that have been launched by
broadcasters).
Selects the power saving mode to reduce the power consumption of the TV.
When "Picture Off" is selected, the picture is switched off and the
indicator on the TV front panel lights up in green. The sound remains unchanged.
"On": Automatically optimises the picture settings according to the ambient light in
the room.
"Off": Turns off the "Light Sensor" feature.
~
Be sure not to put anything over the sensor, as its function may be affected. See page 14 for
further information on the sensor.
Lights up and turns off the Sony logo on the front of the TV.
Switches the TV to standby mode if no signal is received for 30 seconds in the PC
input.
/ 2 on the rear of the TV.
/ 2 socket, you can
/ 1 socket.
socket.
7
/
/
(Picture Off)