Network Settings - Sony Bravia KDL-40W4500 Operating Instructions Manual

CA Module Set-up

Network Settings

Network
Server Display
Settings
Server Diagnostics
Renderer Function
Renderer Access
Control
Renderer Set-up
46
GB
Allows you to access a pay TV service once you obtain a Conditional Access
Module (CAM) and a view card. See page 22 for the location of the
(PCMCIA) socket.
IP Address DHCP (DNS
Settings automatic)
DHCP (DNS
manual)
Manual
Test Diagnoses whether the network is correctly connected.
IP Address/ You need to configure each item when "Manual" is selected
Subnet Mask/ in "IP Address Settings."
Default Gateway/
When "DHCP (DNS manual)" is selected, be sure to enter
Primary DNS/ "Primary DNS" and "Secondary DNS" server addresses
Secondary DNS
manually.
MAC Address
Displays the MAC address, which is a fixed, globally unique
identifier of the network device.
Displays the connected server list and allows you to select the server you want to
display on the Home menu.
Diagnoses whether the TV can connect to each server on the home network.
Enables playback of photos or music on the TV through other control devices on
the network, such as a digital still camera or mobile phone.
Allows you to specify the accessible controller to the TV. When this setting is set
to "On", you can playback photos or music on the TV using the controller.
Automatic Allows you to select whether to permit access to the TV
Access
automatically when the network device accesses the TV for
Permission the first time.
Renderer Name Allows you to set the name of the TV to be shown on the
controller.
Automatically acquires the network
settings through the Dynamic Host
Configuration Protocol server function of
the router or Internet service provider.
Automatically acquires the network
settings except for DNS server settings.
You can manually set the DNS settings.
Allows you to set the network settings
according to your network environment.