Table of Contents
Advertisement
Fault
Remnants of food on table-
ware.
Detergent residue in the ap-
pliance
Cause
Tableware is placed too
close together or basket is
overfilled.
Spray arm rotation is
blocked.
Spray arm nozzles are
blocked.
Filters are soiled.
Filters are inserted incor-
rectly and/or not engaged.
Washing programme selec-
ted too weak.
Tableware has been pre-
cleaned too intensely. The
sensors chose a weaker pro-
gramme. Stubborn soiling
cannot be entirely removed.
Tall narrow receptacles in
corner areas are not rinsed
adequately.
Top baskets on right and left
are not set to same height.
Lid of the detergent dis-
penser is blocked by items
of tableware parts and will
not open.
Troubleshooting en
troubleshooting
Arrange tableware with sufficient
1.
space in between.
The spray jets must reach the sur-
faces of the tableware.
Avoid points of contact.
2.
Arrange tableware so that it does
▶
not obstruct spray arm rotation.
Clean the "Spray arms" → Page 46.
▶
Clean the filters.
▶
→ "Cleaning filters", Page 45
Insert the filters properly.
1.
→ "Filter system", Page 45
Engage the filters.
2.
Select a more intensive washing
▶
programme.
→ "Programmes", Page 20
Adjust the sensitivity of the sensors.
▶
→ "Sensors", Page 13
Only remove large remnants of food
▶
and do not prerinse tableware.
Adjust the sensitivity of the sensors.
▶
→ "Sensors", Page 13
Do not position tall narrow recept-
▶
acles at too great an angle or in
corner areas.
Set the top baskets on the left and
▶
right to the same level.
→ "Top basket", Page 23
Arrange tableware in the top basket
1.
tableware so the tab collecting tray
is not obstructed by tableware.
→ "Arrange tableware", Page 34
Items of tableware are blocking the
dispenser lid.
Do not place tableware or fra-
2.
grance dispensers in the tablet col-
lecting tray.
51
Advertisement
Table of Contents
