Hints And Tips; Ecological Hints; Adjustment Of Default Dryness Level - AEG T9DEC866R User Manual

2. Open the appliance door.
3. Remove the laundry.
4. Close the appliance door.
Possible causes of unsatisfactory drying results:
• Inadequate default dryness level settings. See chapter
• Room temperature is too low or too high. Optimal room temperature is between 18°-25°C.

9. HINTS AND TIPS

9.1 Ecological hints

• Spin the laundry well before drying.
• Do not exceed the load sizes which are specified in the programmes chapter.
• Clean the filter after each drying cycle.
• Do not use fabric softener to wash and then dry. In the tumble dryer laundry becomes soft
automatically.
• The water from the water container can be used to iron the clothes. You must first filter the
water to eliminate remaining textile fibres (simple coffee filter is suitable).
• Always keep the airflow slots at the bottom of the appliance clear.
• Make sure there is good airflow where the appliance is to be installed.

9.2 Adjustment of default dryness level

To change the default dryness level:
1. Turn the appliance on.
2. Wait approximately 8 seconds.
3. Select 1 of the available programmes.
4. Touch and hold down the Quiet Mode and Refresh buttons at the same time.
One of the symbols appears on the display:
- Maximum dryness
- Extra dryness
- Standard dryness
5. Touch the Start/Pause button repeatedly until you reach the desired dryness level.
Dryness level
Maximum dryness
Extra dryness
Standard dryness
6. To memorise the setting touch and hold down the Quiet Mode and Refresh buttons at the
same time for approximately 2 seconds.
HINTS AND TIPS
Adjustment of default dryness level
Display symbol
21/36