Table of Contents
Advertisement
C. Programming the Double Quantity Pad - For multiple portion heating:
your oven is lactory set to automatically double thg programmed time for multiple portion heating - this is the correct setting
tor heating multipleportions of most small foods items. No Iurther programming of the time is necessary for these lood items
The time iequired to heat multiple portions ot some large planers and most bulk food loads is slightly less than double that ol a
single portion.
Thi; model incorporates a Multiple Portion Heating Custom Program feature lhat allows you to customize the heating time
and/or power level for multiple portions of your menu items.
For example, if Memory Pad 3 is set for 6 minutes at DEFROST, 12 minutes at DEFROST is set for double quantity heating
automatically. Howevei, il your own tests have determined that the correct heating times required is less (only 10 minutes 30
seconds at OeFROSTI tot t*o portions, the
"Multiple Portion Heating Custom Program" feature can be programmed tor 10
minutes 30 seconds at DEFROST.
Disolav window
I
.+e,+
2
' t .
NOTE: . program the remaining Memory Pad as desired by repeating steps 1-6 above. (You may insert up to 10 memory
programs.)
DO NOT OPEN THE OVEN DOOR while programming
. When the PBOG indicator is blinking, the program can be cancelled and/or the pad erased by pressing STOP/RESET
Pad.
Example: To program 30 seconds at HIGH
I PBoG. I
Power on Memory Pad Number 2
.Press the PROG. Pad.
NOTE:
.lf no PROG lndicator appeares in the
Display Window,
"Program Lock" should be
cancelled (see page 15).
.Do not keep pressing PROG. Pad for
more than 30 seconds, or a lalse
failure code may result.
.Press DOUBLE OUANTITY (x 2) Pad.
.Press Memory Pad 2.
The pad number and the PreviouslY
selected time and power level for
multiple portion heating will
appear in the Display Window.
.The pad number and Stage Heating Indicator
will appear in the Display Window again.
.Press the POWER Level Selector Pad
once. The Memory Pad displaY will
go out.
.Press the Memory Pads 3, 0.
.Press the PROG. Pad again.
You have completed programming the
selected Memory Pad lor multiPle
portion heating.
.2 seconds later, the setting for single
stage heating will appear in the Display Window.
.2 seconds later, the Display Window
will go blank.
F
s
ro
uJ
z
2 .
3.
r;;n
u'15*J
4E
l-ril-l
t PowER
I
[E
F,"a
t -
" . -
f tol
)
)
l
L
ru
t
l
4.
- 1 4 -
Hide quick links:
Advertisement
Table of Contents
